26029495
supply , installation and commissioning of it hardware and software for setting up of an information technology laboratory at uzbekistan armed forces academy , tashkent , uzbekistan 2 videoconferencing terminal vks type 1 ( with 3 rotary cameras each ) , based on: 2k ta. in large lecture classes. composition of the vcs video communication terminal set: n codec n camera rotatable 3 pcs. n set of 2 wireless microphones n devices for wireless content transfer n license for subscribers. nrequirements for technical and functional characteristics of the video conferencing terminal ( codec ) : n implementation of compression / decompression procedures for audio and video streams at the hardware level; n organization of communication by means of an ip network using h. 323 and sip protocols; n availability of a radio remote control; n availability is at least one network interface of the 10 / 100 / 1000 base t type; n support for working with a video stream in quality not worse than full hd 1080 60p; n support for 1080 30p content transfer; n ability to wirelessly receive content from the lecturer; n the ability to connect at least nine cameras with support for control from the terminal, the standard remote control; n ability to connect two microphones; n ability to connect wireless microphones; n support for h. 264 high profile, h. 263, h. 265 hvec video encoding algorithms; n support for opus, aec, g. 722, and g. 711 audio encoding algorithms; n availability of the integrated video outputs: n at least two hours; n availability of the integrated video inputs: n at least one hdmi; n line audio input type rca; n availability of rca line audio output; n at least 3 usb ports; n transfer audio to the display device via hdmi; n support for the russian language interface for managing the video conferencing terminal; n support for remote hardware software updates. n support for packet loss prevention technology ( anti packet loss technology ) n ability to record a conference on a usb stick n support for at least 8 cameras with one codec n nrequirements for technical and functional characteristics of a video camera complete with a video communication terminal ( codec ) : n hardware support for working with video with a quality is at least full hd 1920 x 1080 60p, at least 2 mp; n frame rate is at least 50 fps; n availability of automatic exposure control; n availability of auto focus; n presence of noise reduction mode; n support for video conferencing terminal management; n at least 12x optical zoom; n horizontal viewing angle is at least 70°; n vertical viewing angle is at least 42°; n video output hdmi; n availability of an rj 45 output for connecting to the codec and transmitting the video stream over ethernet; n presence of the rj 45 camera control interface; n availability of an rs 232 camera control interface; nrequirements for technical and functional characteristics of a wireless circular microphone: nthe package must include at least 2 circular pattern microphones, an adapter for connecting to the codec, and a charging station for them; n sound capture radius is at least 3m n on button. / microphone off; n support for the dect standard ( 1880 1900hz ) n battery capacity is at least 800mah nrequirements for technical and functional characteristics of a wireless content transmission device complete with a video communication terminal ( codec ) : n source and receiver of the signal in the composition; n video transmission in a resolution is at least 1080p; n delay no more than 120ms; n usb interface; nwarranty for the set is at least 12 months. n 3 videoconferencing terminal vks type 2, based on: 5 pcs. in the laboratory, 1 pc. in the laboratory room requirements for technical and functional characteristics of the videoconferencing terminal: n implementation of compression / decompression procedures for audio and video streams at the hardware level; n organization of communication by means of an ip network using h. 323 and sip protocols; n availability of a radio remote control; n availability is at least one network interface of the 10 / 100 / 1000 base t type; n support for working with a video stream in quality not worse than full hd 1080 60p; n support for 1080 30p content transfer; n ability to wirelessly receive content from the lecturer; n the ability to connect at least nine cameras with support for control from the terminal, the standard remote control; n ability to connect two microphones; n ability to connect wireless microphones; n support for h. 264 high profile, h. 263, h. 265 hvec video encoding algorithms; n support for content transfer protocols n support for opus, aec, g. 722, and g. 711 audio encoding algorithms; n availability of the integrated video outputs: n at least two hours; n availability of the integrated video inputs: n at least one hdmi; n presence of a 3.5 mm linear audio input; n 3.5 mm linear audio output; n at least 3 usb ports; n transfer audio to the display device via hdmi; n support for the russian language interface for managing the video conferencing terminal; n support for remote hardware software updates. n support for creating two independent conferences at the same time n support for packet loss prevention technology ( anti packet loss technology ) n availability of a built in camera n support for at least 8 cameras with one codec n ability to record a conference on a usb drive nrequirements for technical and functional characteristics of the built in video camera of the video communication terminal ( codec ) : n hardware support for working with video with a quality is at least full hd 1920 x 1080 60p, at least 2 mp; n frame rate is at least 50 fps; n availability of automatic exposure control; n availability of auto focus; n presence of noise reduction mode; n support for video conferencing terminal management; n at least 12x optical zoom; n horizontal viewing angle is at least 70°; n vertical viewing angle is at least 42°; n video output hdmi; n availability of an rj 45 output for connecting to the codec and transmitting the video stream over ethernet; n presence of the rj 45 camera control interface; n availability of an rs 232 camera control interface; nrequirements for technical and functional characteristics of a wireless circular microphone: nthe package must include at least 2 circular pattern microphones, an adapter for connecting to the codec, and a charging station for them; n sound capture radius is at least 3m n on button. / microphone off; n support for the dect standard ( 1880 1900hz ) n battery capacity is at least 800mah n warranty is at least 1 year. nrequirements for technical and functional characteristics of a wireless content transmission device complete with a video communication terminal ( codec ) : n source and receiver of the signal in the composition; n video transmission in a resolution is at least 1080p; n delay no more than 120ms; n usb interface; nwarranty for the set is at least 12 months. n 4 interactive touch screen 65, based on: n4 pieces in large lecture classes, n11 pcs. in the laboratory, 1 pc. in the laboratory room nrequirements for technical and functional characteristics n image format 16:9; n display diagonal 65 ( 165 cm ) ; n screen resolution 1920*1080; n mode of operation 24 / 7; n contrast 4000; n number of touches – 10 simultaneous ( finger, pen, or any other opaque objects ) ; n number of users 10; n input connectors digital tv tuner, hdmi*2 input, vga input, audio input, 3.5 mini jack, usb 3.0*2; n output connectors vga output, audio output, 3.5 mini jack; n audio output 2 x 10 watt; n processor intel core i3 4130; n ram 4 gb ddr3 1600; n installed hdd capacity hdd 500gb sataiii 5400 rpm; n network 10 / 100 mbit / s realtek; n a set of fasteners for installation on drywall surfaces; n warranty is at least 12 months. n 5 mobile interactive tribune based on: 2 pcs. in large lecture classes requirements for technical and functional characteristics of the interactive stand: n metal case material n interactive screen 22; n gooseneck microphone + wireless microphone ( manual and lapel ) ; n integrated multimedia player ( with amplifier ) ; n pks 7000c control controller ( with amplifier ) + 7 lcd touchpad+ laptop input ( hdmi ) n input interfaces: vga, hdmi x2, rj45, usb x4, power socket n 150w x 2 / 8o amplifier ( 300w ) n speaker 60 w ( 2ea ) n warranty is at least 12 months. n 6 color mfp a4 size based on: 2 pcs. in large lecture classes requirements for technical and functional characteristics: n? device type printer / scanner / copier; nprinter: n printing technology laser printing; n print type color; n paper size a4; n support for automatic two sided printing; n max. print speed a4 b / w one sided at least 25 pages / min; n print resolution 600 x 600 dpi, 1200 x 1200 dpi; n support ufrii, pcl6; n print jpeg / tiff / pdf files from usb media; n scanner: n type color n paper size a4; n form factor tablet, two way automatic document feeder; n scanning resolution optical 600 x 600 dpi; n adf scanning speed: one way at least 55 images. / min ( 300dpi ) and 30 images. / min ( 600dpi ) , two way at least 27 images. / min ( 300dpi ) and 15 images. / min ( 600dpi ) ; n twain and wia support; n support sending files by mail, to pc, to usb storage, to smb / ftp server jpeg / tiff / pdf; ncopier: n paper size a4; n one way copy speed: a4 b / w at least 25 pages / min; n copy resolution 600 x 600 dpi; ngeneral: n paper feed manual / automatic, one way / two way; n the volume of the feed tray is at least 500 sheets; n the volume of the feed tray is at least 100 sheets in the universal tray; n the volume of the output tray – 250 sheets; n paper type – thin, plain, secondary, color, pre perforated, thick, fabric, transparent film, labels, envelopes, tracing paper; n paper density standard tray from 55 to 220 g / m2; n memory capacity at least 2gb; n control panel – color lcd touch screen; n connection interface usb 2.0, usb3. 0, 10 / 100 / 1000 ethernet rj 45; n power supply 220 240 v, 50 / 60 hz; n os support – windows 10 / 8. 1 / 7, mac os x, linux; n warranty is at least 12 months n 7 a4 color inkjet printer based on: 6 pcs per lab nrequirements for technical and functional characteristics: n? device type – printer nprinter: n printing technology inkjet printing; n print type color; n paper size a4; n support for automatic two sided printing; n max. print speed a4 b / w one sided at least 14.5 pages / min; color – 10.4 pages / min n print resolution up to 9600 x 2400 dpi support ufrii, pcl6; n print jpeg / tiff / pdf files from usb media; ngeneral: n paper feed manual / automatic, one way / two way; n the volume of the feed tray is at least 500 sheets; n the volume of the feed tray is at least 100 sheets in the universal tray; n the volume of the output tray – 250 sheets; n paper type – thin, plain, secondary, color, pre perforated, thick, fabric, transparent film, labels, envelopes, tracing paper; n paper density standard tray from 55 to 220 g / m2; n memory capacity at least 2gb; n control panel – color lcd touch screen; n connection interface usb 2.0, usb3. 0, 10 / 100 / 1000 ethernet rj 45; n power supply 220 240 v, 50 / 60 hz; n os support – windows 10 / 8. 1 / 7, mac os x, linux; n warranty is at least 12 months n 8 personal computer with two monitors completed with: 34 pcs. in the laboratory for web and object oriented programming, 26 pcs.in the laboratory for cybersecurity and hardware programming. pc features: n quantity – 1 pc. n form factor: tower n number of processor cores at least 8; n processor base clock frequency not less than not less than 3.1 ghz with the maximum frequency in overclocking mode not less than 4.9 ghz; n processor cache memory not less than not less than 16mb; n the processor must be able to work with 64 bit and 32 bit applications at the hardware level; n the amount of ram not less than 32gb ddr4 2666; n ability to expand ram up to 128gb; n ability to install memory with ecc support; n at least 4 slots for installing memory modules; n at least 4 sata interfaces for connecting hard drives and solid state drives; n solid state drive ( ssd ) not less than 256gb; n hard disk with at least 2tb sata 7200rpm; n hard disk controller with support for raid levels is at least 0.1; n dvd rw optical drive; n video card: discrete, processor frequency not less than 1700mhz, memory capacity not less than 8gb, memory type gddr6, memory bus bit not less than 256 bit, at least 3 displayport ports, at least 1 hdmi port, cooling system type active; n network interface: at least 1 x rj 45 ethernet with 100 / 1000mbps; n i / o interfaces: at least 6 usb 3.0 ports, at least 2 usb2.0 ports, at least 1 universal audio port, at least 2 audio outputs / inputs, at least 2 displayport ports; n at least 1 pcie gen3 x16 slot, at least 1 pcie gen3 x4 slot, at least 2 pcie g3 x1 slots, at least 2 m. 2 slots for ssd installation ( pcie gen3 x4 ) ; n power supply with a power is at least 650w and an efficiency is at least 90% with active power factor correction; n russian keyboard and mouse with scroll wheel; n warranty is at least 3 years without returning the drives when the warranty is replaced nmonitor feature: n quantity – not less than 2 units with bracket mount to the table n panel type ips with led backlight; n monitor diagonal is at least 23.8” with an aspect ratio of 16: 9; n anti glare coating; n native resolution is at least 1920x1080 @ 60 hz; n number of displayed colors: at least 16.7 million; n brightness is at least 250 cd / m2; n contrast ratio is at least 1000:1; n response time no more than 5ms; n ports – 1xdisplay port; 1xvga, 1xhdmi; n at least 2 usb3.0 ports n viewing angles is at least 178 horizontally and vertically; n support for vesa mounting 100mm; n stand with the ability to adjust the angle of the monitor, adjust the height is at least 100mm, with the ability to rotate in the horizontal and vertical plane; n bracket for installing two displays simultaneously on vesa 100mm mounts from 19 to 27 inches with the ability to adjust the height to 120mm, adjust the tilt angles from 5 to 24 degrees, rotate the monitors in portrait orientation; n licensed windows 10 operating system n warranty is at least 3 years n 9 enhanced personal computer ( graph station ) with two monitors completed with: 5 pcs. in the laboratory for 3d modeling and creation of virtual reality software, 3 pcs. in the multimedia laboratory pc features: n quantity – 1 pc. n form factor: tower n number of processor cores at least 8; n the base clock frequency of the processor is not less than not less than 3.6 ghz with a maximum frequency in overclocking mode of not less than 4.9 ghz; n processor cache memory not less than not less than 16mb; n the processor must be able to work with 64 bit and 32 bit applications at the hardware level; n the amount of ram not less than 64gb ddr4 2666; n ability to expand ram up to 128gb; n ability to install memory with ecc support; n at least 4 slots for installing memory modules; n at least 4 sata interfaces for connecting hard drives and solid state drives; n a solid state drive ( ssd ) is at least 512 gb; n hard disk at least 4tb sata 7200rpm; n hard disk controller with support for raid levels is at least 0.1; n dvd rw optical drive; n video card: discrete, processor frequency not less than 1700mhz, memory capacity not less than 8gb, memory type gddr6, memory bus width not less than 256 bit, at least 3 displayport ports, at least 1 hdmi port, cooling system type active; n network interface: at least 1 x rj 45 ethernet with 100 / 1000mbps; n i / o interfaces: at least 6 usb 3.0 ports, at least 2 usb2.0 ports, at least 1 universal audio port, at least 2 audio outputs / inputs, at least 2 displayport ports; n at least 1 pcie gen3 x16 slot, at least 1 pcie gen3 x4 slot, at least 2 pcie g3 x1 slots, at least 2 m. 2 slots for ssd installation ( pcie gen3 x4 ) ; n power supply with a power is at least 650w and an efficiency is at least 90% with active power factor correction; n russian keyboard and mouse with scroll wheel; n warranty is at least 3 years without returning the drives when the warranty is replaced n monitor features: n quantity – not less than 2 units with bracket mount to the table n panel type ips with led backlight; n monitor diagonal is at least 23.8” with an aspect ratio of 16: 9; n anti glare coating; n native resolution is at least 1920x1080 @ 60 hz; n number of displayed colors: at least 16.7 million; n brightness is at least 250 cd / m2; n contrast ratio is at least 1000:1; n response time no more than 5ms; n ports – 1xdisplay port; 1xvga, 1xhdmi; n at least 2 usb3.0 ports n viewing angles is at least 178 horizontally and vertically; n support for vesa mounting 100mm; n stand with the ability to adjust the angle of the monitor, adjust the height is at least 100mm, with the ability to rotate in the horizontal and vertical plane; n bracket for installing two displays simultaneously on vesa 100mm mounts from 19 to 27 inches with the ability to adjust the height to 120mm, adjust the tilt angles from 5 to 24 degrees, rotate the monitors in portrait orientation; n licensed windows 10 operating system n warranty is at least 3 years n 10 laptop based on: 2 pcs. in large lecture classes, 6 pcs. in the laboratory. n processor: n microprocessor with an x64 architecture focused on multithreaded computing, with at least 4 cores and a base clock frequency is at least 1.6 ghz and in overclocking mode is at least 3.4 ghz with a level 3 cache is at least 6mb. you must be able to work with 64 bit applications on the hardware level; nmemory and storage of information: n at least 8gb ddr4 2400; n ability to expand the amount of ram up to 32gb; n number of slots for installing memory at least 2; n hard disk capacity is at least 500gb sata 7200 rpm; ni / o interfaces: n at least 3 usb3.0 and higher ports; n at least 1 usb2.0 port; n at least 1 vga port; n at least 1 hdmi port; n at least 1 rj45 port of the 1gbit / s ethernet network adapter; n at least 1 universal input for connecting the headset; ndisplay: n ips with led backlight; n monitor diagonal is at least 15.6” with an aspect ratio of 16: 9; n anti glare coating; n native resolution is at least 1920x1080 @ 60 hz; n brightness is at least 250 cd / m2; n contrast ratio is at least 600:1; n the viewing angles are not less than 85 horizontal, 85 vertical. nother requirements: n graphics video adapter with a memory capacity is at least 2gb ddr3 with a memory bus bit depth is at least 64 bits, processor frequency is at least 900mhz, support for directx 12, opengl 4; n multi language keyboard; n power supply with a capacity is at least 65w; n licensed windows 10 operating system n warranty is at least 3 years, which does not require the return of drives for replacement. n 11 tv station equipment for satellite reception and broadcasting of ip tv based on 1 pc. per server room the all in class device includes a head end station that allows you to receive satellite ( dvb s / s2 ) , terrestrial ( dvb t / t2 ) , cable ( dvb c / c2, ip ) signals and retransmit more than 200 channels in a local network, with the possibility of unicast broadcasting. nbuilt in storage with the ability to host several hundred educational movies n rackmount 19”, 2u n power supply: 90 264 v, 47 63 hz n management, performance n lcm display for initial setup and viewing statistics n admin web interface n rs 232 console n up to 500 subscribers n more than 200 tv channels n external interface n 4 gigabit ethernet 10 / 100 / 1000 ports n 16 common interface slots n 16 universal dvb s2 / t2 / c n 2 inputs vga, usb n warranty is at least 3 years, which does not require the return of drives for replacement. n 12 receiving satellite antenna with feeder heads based on 6 pcs. on the roof of the educational building for receiving tv channels from the satellites to the required degree 13 network sockets rj 45cat 6 based on: 120 pcs. for the entire ict clc category not lower than cat.6 n type of installation in gathering with a casing n undisclosed n type of mounting in the spacer and on the screws n device width 85 mm n device height 85 mm n device depth 33.3 mm n property of the thermoplastics material n material: plastic n suitable for ip20 degree of protection ( ip ) n number of modules ( for modular series ) 2 n 14 utp cat 6 cable based on: 7000 m. for the entire ict clc 4 pair cable, category 6 n data transfer rate up to 1000 mbit / s when using 4 pairs. n 15 connectors rj 45 cat 6 based on 480 units for the entire ict clc the connector type is rj 45 ( 8p8c ) n cat 6 category n bandwidth, 250 mhz n performance of unshielded n contact material phos photized bronze with a gold coating of 1.25 microns n housing material: transparent polycarbonate ( pc, ul 94v 2 ) n type of knives for single core cable n the thickness of the conductors, awg 23 25 n storage temperature, t °c 40 ~ +70 n operating temperature, t °c 30 ~ +80 n 16 patch panels for 48 ports based on 4 pcs. per server room number of ports 48 n utp escaping n cat category. not less than 6e n constructive 19 n patch panel type network rj 45 n built in cable organizer is available n mounting height 1u n 17 hdmi cable 10 m nbased on: 15 pcs for the entire ict clc n interface: hdmi type a / a plug in; n support hdmi2.0 4k@60hz; n video signal resolution: 480p, 720p, 1080i, 1080p, 3d, 4k@30hz, 4k@60hz n bandwidth: 18.2 gbps ( 6gbps x 3 ) ; n support for hdcp2.2 / cec / edid / hdr; n transmission of high frequency signals via optical fiber, without emi, without signal loss; n 4.8 mm outer diameter; n 18 hdmi cable 20 m nbased on: 5 pcs for the entire ict clc n interface: hdmi type a / a plug in; n support hdmi2.0 4k@60hz; n video signal resolution: 480p, 720p, 1080i, 1080p, 3d, 4k@30hz, 4k@60hz n bandwidth: 18.2 gbps ( 6gbps x 3 ) ; n support for hdcp2.2 / cec / edid / hdr; n transmission of high frequency signals via optical fiber, without emi, without signal loss; n 4.8 mm outer diameter; n 19 hdmi cable 5 m nbased on: 5 pcs for the entire ict clc n interface: hdmi type a / a plug in; n support hdmi2.0 4k@60hz; n video signal resolution: 480p, 720p, 1080i, 1080p, 3d, 4k@30hz, 4k@60hz n bandwidth: 18.2 gbps ( 6gbps x 3 ) ; n support for hdcp2.2 / cec / edid / hdr; n transmission of high frequency signals via optical fiber, without emi, without signal loss; n 4.8 mm outer diameter; n 20 hdmi splitter ( splitter ) based on: 5 pcs. for the entire ict clc support hdmi 1.4 b n hdcp 1.2 support n support ultra hd ( 4kx2k ) n cec n indication of active inputs and outputs n supported resolution: n 480i@60hz, 480p@60hz, 576i@50hz, 576p@50hz, 720p@50 / 60hz, 1080i@50 / 60hz, 1080p@50 / 60hz, 1080p@24hz 3d, 720p@50 / 60hz 3d, 4x2k n color rendering 24bit / dark color 30bit dark color 36bit n video format: n dts hd / dolby true hd / lpcm7.1 / dts / dolby ac3 / dsd n maximum transfer rate of 10.2 gbps ( 340mhz ) n cascading of 3~4 layers n hdmi connectors: type a 19 pin female n operating temperature: +5 +35°c n relative humidity: up to 85% n metal case n power supply: input: ~ 220v / output: +5v n maximum cable length for input 15 m ( for 4k resolution 12 m ) , for output 25 m ( for 4k resolution 15m ) n 21 usb programmer based on 13 pcs. in the laboratory for hardware programming universal usb microcontroller programmer, flash, eeprom, eprom, nvram, pld n the number of programmable chips has no hardware restrictions; n programming only according to manufacturer specifications; n universal 48 dip pad with zero effort with the ability to install chips with a case width of 300 mm ~ 600 mm; connection to a computer via a usb 2.0 compatible port; n support for programming chips in the users device. ( isp mode ) ; n the ability to work with multiple programmers under the control of a single computer ( multi program mode ) . n implementation of a usb programmer based on a high performance 32 bit processor and a high speed programmable matrix ( fpga ) of large volume. expanding the list of supported devices by simply updating the software version; n implementation of logic drivers based on fpga, capable of bringing logic signals of low, high level, external generator, as well as pullup, pulldown to any output of the pad; n availability of 10 bit digital to analog converters for programming analog voltage sources; n ability to program the rise and fall front of the analog voltage; n automatic adjustment of analog voltage; n ability to connect analog power supply voltages and programming to any chip pin; n the ability to switch any output of the chip with ground; n hardware monitoring of each output of the programmable chip for the presence of a contact before programming; n fast acting overcurrent protection circuits that increase the reliability of the programmer. protection of incorrectly connected chips; n protection of all pad terminals from electrostatic discharge; n button that starts execution of any selected operation or sequence of operations; n programmable frequency synthesizer; n self testing. n 22 3d scanner based on: 1 pc. to the laboratory for 3d modeling and creation of virtual reality software weight, kg 1.13 n obj , stl , asc , ply , p3 file formats n ability to capture texture yes ( with color scanning module ) n scan time is less than 1 second. n depth of field, mm ±100 n scan area 135x100 mm 225x170 mm n usb 3.0 interface n led light source n minimum system requirements video: nvidia gtx770 and above; video memory over 4g; cpu: i7 and above; ram: 16g and above n volume accuracy 0.3 mm n working distance 400 mm n distance to the point 0.2 2 mm n scanning speed of 20 30 fps, 100, 000 dots / s n scanning accuracy up to 0.05 mm n 23 3d printer based on: 1 pc. to the laboratory for 3d modeling and creation of virtual reality software sla printing technology n printing material photopolymer resin n the print area, mm 650x600x400 n layer thickness, 50 microns n print speed, g / h 120 n scanning speed, m / s 10 n the diameter of the laser spot, mm 0, 1 n uv wavelength, mm 355 n windows 10 operating system n supported file formats: .stl, .slc n 24 head mounted display based on: 4 pc. to the laboratory for 3d modeling and creation of virtual reality software set of: n htc vive virtual reality helmet 1pc. n vive controllers 2 pcs. n base stations 2 pcs. n power cables 1 pc. n face plates 2 pcs. n nose pad 1 pc. n 3 in 1 cable 1 pc. n communication module 1 pc. n earplugs 1 pc. n cables, chargers and accessories ( set ) 1 pc. n specifications: n display resolution of 1080 x 1200 pixels for each eye ( 2160 x 1200 pixels for both eyes ) n the viewing angle is 110 degree n the corners of the steps of positioning systems 120 degrees n display diagonal 3.6 inches n refresh rate of 90 hz n wire length 4.5 meters n steam vr platform n compatible with pc and windows os n adjusting the lens / focal length n head –mounted display weight 512 grams n helmet features support for 2 htc base stations n steam vr tracking sensors, accelerometer, gyroscope, proximity sensor n interfaces 1x usb 3.0; 1x hdmi 1.4 n 25 virtual platform based on: 1 pc. to the laboratory for 3d modeling and creation of virtual reality software set of: n kat walk platform n module for visual display and management of equipment with the kat station server n kat fire game gun n 3 pairs of pads for kat shoes n kat sensor suite for the kat space platform n mounting kit with keys, grease, etc. n htc vive complete set including controllers, helmet, laser trackers and wires n set of kat cable cables and adapters nset of 11 different kat games ( upgradable and updated ) n 26 video camera: based on 1 piece per multimedia lab 4k camcorder with fixed lens ag dvx200 n 4 / 3 mos matrix n 12 stages of dynamic range n dci 4k 24p, uhd 4k up to 60p n variable frame rate up to 120 fps in arv n recording in mp4 / mov in 4k n integrated leica 13x f / 2.8 – f / 4.5 lens n 3x separate the control ring of the lens n 2 cd card slots ( compatible with u3 ) n hdmi 2.0, 3g sdi output. n optical image stabilizer n 27 memory card: based on 3 pcs. per multimedia lab 256gb professional 1000 x uhs ii sdxc sdxc memory card ( class 10, uhs speed class 3 ) 28 on camera mic gun based on: 1 pc for multimedia lab narrow focus microphone ( gun ) mounted on the ag dvx200 camera 29 battery for the camera based on: 3pc for multimedia lab battery for the camera 4k camera – vw vbd58 ( 7.2 v, 5800mah ) 30 on camera lamp for 4k camcorder based on: 1 pc for multimedia lab on camera two color led camera light for ag dvx200 4k camcorder n variable color 3200 to 5600k n dimming from 100 to 10% n power consumption 12w n compatible with sony l series batteries n 1 / 4 20 threaded hole n d tap power cable n spherical shoe mounting adapter n removable doors and filter diffuser n 31 battery for on camera lamp based on:2 pc for multimedia lab np f975 li ion battery ( 7.4v, 7800mah ) 32 charger for on camera lamp based on: 1 pc for multimedia lab compact ac / dc charger for l & m series batteries 33 camera bag based on: 1 pc for multimedia lab portable bag for 4k ag dvx200 camera 34 tripod for 4k camcorder based on: 1 pc for multimedia lab 509hd head + 545 tripod with lower stretch n material: aluminum. n maximum load: up to 13.5 kg n optimal load: up to 12.8 kg n maximum height: 172cm n minimum height: 48cm n folded length: 84cm n bridging technology n variable resistance when panning n abr balancing system with indication n 4 balancing options n extended and extended platform for camera installation n included: head, tripod, lower stretch, cover. n 35 camera stabilizer based on: 1 pc for multimedia lab inline function n operating mode: n suspension n inverted n portable n built in independent ins module n dji stabilizer motors with encoders n bluetooth module n usb connector n 2.4 ghz receiver n temperature sensor 32 bit cpu n d bus support n current static current: 300 ma ( at a voltage of 16 v ) n dynamic current: 600 ma ( at a voltage of 16 v ) n max. current of the locked rotor: 10 a ( at a voltage of 16 v ) n operating temperature range 15°...+50° c ( 5° 120° f ) n weight with handle: 2.3 kg ( 5.07 lb ) n stabilizer dimensions ( w x d x h ) 500 x 210 x 420 mm n periphery n camera holder size max. depth from center of gravity to camera mounting plate: 120 mm n max. height from the top of the camera mounting plate: 195 mm n max. width: 160 mm n connectors for additional devices: n adjustable 12 v p tap connector ( 2 ) , n usb 500mw ( 1 ) , dji lightbridge ( 1 ) power supply for the control unit battery ronin m 4s n communication interface n 2.4 ghz remote control, n bluetooth 4.0, usb 2.0 min. n 36 lighting kit based on: 1 pc for multimedia lab two color lighting led panel 2x s 2410c ( 2 devices ) ; n bi color edge mounted led lighting panel for studio and out of studio shooting. n includes 2 tripods, a set of 2 batteries and 2 np f975 chargers. n led panel 240 high brightness leds. n light intensity at 1 meter 1065lux, at 2 meters 350lux. n the angle of the light flux of 75°. n color temperature, changeable 3200k° 5600k°. n power consumption is not more than 60w. n 12 17v power supply. n platform for self powered v lock or dv ( sony f 970 ) . n weight: 2.85 kg, diameter: 520mm, thickness: 50mm n 37 digital camera based on: 1 pc for multimedia lab 35mm 30.4 megapixel eos 5d mark iv camera, with 36x24mm full frame cmos sensor n the image processor, the digic 6+ n 3.2 inch lcd touch monitor with a diagonal of 1.62 m n dci 4k video at 30 frames per second; n 8.8 mp still grab n 61 point high density mesh autofocus n native iso 32000 extended to iso 102400 dual pixel raw; n af zone selection button n dual pixel cmos af and movie server af 7 frames per second; n cf and sd card slots n built in gps and wi fi with nfc n 38 standard lens for the camera based on: 1 pc for multimedia lab ef 24 105mm f / 4 is ii usm standard zoom lens for canon ef 35mm slr cameras; n angle of view ( horizontal, vertical, diagonal ) 74° 19°20, 53° 13°, 84° 23°20; n lens design ( elements / groups ) 17 / 12; n number of diaphragm lobes 10; n minimum aperture 22; n minimum focal length ( m ) 0.45; n maximum magnification ( x ) 0.24 ( at 105 mm ) ; n 4 step image stabilizer; n autofocus drive ring type ultrasonic motor. n 39 wide angle lens for camera based on: 1 pc for multimedia lab ef 16 35mm f / 2.8 l iii usm high speed wide angle lens with variable focal length for 35mm canon ef slr cameras; n angle of view ( horizontal, vertical, diagonal ) 98° 54°, 74°10 38°, 108°10 63°; n lens design ( elements / groups ) 16 / 11; n number of diaphragm lobes 9; n minimum aperture 22; n minimum focal length ( m ) 0.28 n maximum magnification ( x ) 0.25 ( at 35mm ) n 40 lens body ( zoom ) for the camera based on: 1 pc for multimedia lab ef 70 200mm f / 2.8 l is ii usm high performance telephoto lens with variable focal length for 35mm canon ef slr cameras; n angle of view ( horizontal, vertical, diagonal ) 29° 10°, 19°30 7°, 34° 12°; n lens design ( elements / groups ) 23 / 19; n number of diaphragm lobes 8; n minimum aperture 32; n minimum focal length ( m ) – 1.2 n maximum magnification ( x ) 0.21 ( at 200mm ) ; n autofocus drive ring ultrasonic drive ( usm ) water / dust proof housing n 41 tripod type monopod based on: 1 pc for multimedia lab tripod type monopod mvmx proa42wus; n load capacity up to 5kg; n max. height 79.9; n closed length – 30.7 in; n sections 4; n weight 2kg; n pan and tilt head; n full liquid base; n fast acting flip locks; n d shaped anti explosion tubes; n rubber handle; n strap; n case. n 42 memory card based on: 3 pc for multimedia lab 256gb extreme pro com past flash memory card ( 160mb / s ) 43 battery for the camera based on: 3 pc for multimedia lab lp e6n li ion battery for camera n mark iv ( 7.2 v, 1865mah ) n 44 camera bag based on: 1 pc for multimedia lab sling style backpack and case for 5d mark vi camera ( black ) 45 photoflash based on: 1 pc for multimedia lab external speed lite 600ex ii rt flash for eos cameras; n sba e3 reflector adapter; n color filter scf e3or1; n mini stand; n soft case; n st e3 rt speed lite transmitter; n quick charger watson – with 8 cells for aa / aaa nimh or nicd batteries; n 2 packs of mx aa nimh batteries watson ( 1.2 v, 2550mah ) ; n universal accessory shoe vello – ( universal accessory shoe mount ) 2 pcs. n 46 mq 300 studio light set for photography based on: 1 pc for multimedia lab studio flash mq 300 3 pcs; n protective cap for flash – 3 pcs; n modeling lamp 75 w – 3 pcs; n power cable – 3 pcs; n sync cable – 1 pc.; n soft box 50x70cm – 1 pc.; n studio stand – 3 pcs; n standard reflector – 2 pcs; n bd 200 reflector ( blinds, honeycomb, color filters ) 1 pc; n snoot reflector ( tube, honeycomb, color filters ) 1 pc; n photo zone for reflection 82cm silver 1 pc; n radio synchronizer vs 604ac 1 pc.; n bag for studio light – 1 pc. n 47 action camera n ( with a set of accessories ) based on: 1 pc for multimedia lab n hero 5 action camera as a video recorder for recording video with 4k resolution 30 fps, 1080p 120 fps, 720p 240 fps, 1080p 120 in looping video mode; n photo – 12mp with support for raw format; n electronic stabilization when shooting; n night lapse mode; n wide viewing angle super view: n hi light tag function; n control the camera both from the remote control and via a smartphone or tablet ( via wi fi and bluetooth ) ; n battery – 1220 mah. n 48 steadicam manual stabilizing with camera based on: 1 pc for multimedia lab steadicam manual stabilizing zenmuse x3 with x3 / fc350h camera. with additional battery hb01 522365. n xthree1 / 2. 3 cmos number of effective pixels 12.4 mp ( total number of pixels 12.76 mp ) n fov 94 lens, 20mm ( equivalent to 35mm format ) f / 2.8 focus 3.5 m; n iso range 100 3200 ( video ) ; 100 1600 ( photo ) ; n the range of shutter speed 8 1 / 8000s ( up to 30 sec in manual mode ) n max. image resolution 4000x3000 pixels; n photo modes time lapse burst shooting 3 / 5 / 7 frames, automatic exposure correction 0.7 ev in 3 / 5 step increments, self timer time laps n 49 wireless microphone combo system based on: 2 pc for multimedia lab ek 100 g3 belt receiver; n sk 100 g3 transmitter; n me 2 clip on lapel microphone; n skp 100 g3 converter n tunable frequencies at 42 mhz 1680; n auto scan frequency of searching of open ranges; n 3 level noise canceller to block interference; n 20 banks with 12 channel presets n 50 lavalier microphone with cable based on: 3 pc for multimedia lab omnidirectional lapel condenser microphone ecm 77bmp with power supply; n cable – 3x2, 3mm n 51 reporter microphone with cable based on: 1 pc for multimedia lab reporter dynamic microphone the md 42 n orientation circular; n frequency range 40 18000 hz; n sensitivity 2.0 mv / pa; n rated resistance 350 ohms; n dimensions 49x250mm n weight 360 g. n 52 sound mixing console based on: 1 pc for multimedia lab profx8v2 sound mixer n inputs: 2 mono mic / line + 2 stereo mic / line + 1 stereo line input; n outputs: 2 mono mic / line + 2 stereo mic / line; n active channel sensitivity: adjusts the input sensitivity in the range 60db ~ 16db for microphone input and 34db ~ +1odb for linear input; n equalization – 3 band equalizer in channels 1, 2, 3 / 4, and 5 / 6, 2 band in channels 7 / 8; n microphone preamps 4 ( low noise with phantom power ) ; n fader type 60mm; n number of spx effects 16; n aux 1 aux send + stereo aux return, easy one knob compressors ( chi+2 ) n 53 control speaker based on: 4 pc for multimedia lab ms40 phase inverted monitor loudspeaker n two way shelf speaker n integrated amplifier n power – 20w n the range chatot 50 25000 hz n dimensions ( wxhxd ) 173x279x245 mm. n 54 external array for online data storage based on: 2 pc for multimedia lab raid array rocket stor 6314a thunderbolt 2 of 4 bays for a set of disks ( 4x10tv ) on 40tv of memory; n 3.5 10tv nas hard drives – 4 pcs. n 4 x 3.5 and 2.5 sata / sas drive bays n 2 x thunderbolt 2 ports n raid 0, 1, 5, 6, 10 and jbod n windows operating system n 55 portable hard drive based on: 2 pc for multimedia lab capacity 10tb, usb 3.0, interface 56 mcu server ?? based on 1 pc to server room physical characteristics: nheight 6u nfour mpm card slots ntwo slots for network interface cards ( one for mcu management ) npower supply: 100 240 vac, 47 63 hz, maximum power consumption of 1200 watts nac option: three ac power supply with three cables ndc option: two dc inputs ( main and battery ) nreplacement fan unit nadvanced tca® noperating conditions noperating temperature: 10 40 °c nstorage temperature: 40 ... 70 °c nrelative humidity: 15 90% without condensation nworking height from 60 m below sea level to 3000 m above sea level ntransportation / storage 60 m below sea level to 15, 000 m above sea level nvideo support nh. 261, h. 263 ( h. 263++ ) , h. 264 nup to 60 frames / sec nfrom qcif to hd1080p including a wide range of intermediate resolutions nup to hd1080p 30fps and 720p 60fps in cp nselecting the 4:3 or 16:9 aspect ratio nresolution in h. 239 ( h. 263 & h. 264 ) content transfer mode: vga, svga, xga nvideo clarity™ for high quality video naudio support ng. 711a / u, g. 722, g. 722. 1 c, g. 722. 1, g. 723. 1, g. 729a, nlocalization of audio files for the auto secretary ncustom and managed mute nkeyboard echo and noise suppression ncapacity nup to 320 media ports and 1600 audio ports nsupport for flexible resource capacity n 80 hd for cp n 120 sd for cp ( max 1024x576 ) n 320 cif for cp&hd sound n 1, 600 voip / pstn 400 nfixed resource capacity sets a fixed capacity regardless of the type of call. ncontrol instruments nweb based management nadministrator, auditor, operator, and user interface nbuilt in monitor management and support for hardware elements nintegration with third party hardware by passing api commands to xml data structures. nup to 4000 entries in the address book na quick search on the address book naccess to external databases nlanguage support nenglish russian, nunicode nnetwork nip h. 323 and isdn npstn and voip voice nisdn ( h. 323 ) nipv4 and ipv6 n10 / 100 / 1000 mb interface nfrom 64 kb / s to 4 mb / s speed nup to 768 kb / s for content ndirect incoming calls from any network ntranscoding naudio algorithms nvideo algorithms nnetwork nresolution nnumber of frames nbitrate nip qos ndiffserv nip priority ndynamic vibration dampener nmasking errors of video and voice nsafety nseparation of the management and media network ntransport layer protection ( sip ) ncomplex password policy naccess level nsecure mode option for any conference npeculiarities nsupport for multipoint hd conferences for rooms with presence effect nup to 24 different conference formats npersonal format nautoformat na range of formats from 1x1 to 4x4 nformat shells nlecture and presentation modes ncall by list nprofiles of conferences nconference templates nremote camera control nability to call and be called nup to 4000 meeting rooms nadvanced ivr nmultilingual names of the subscribers nsupport for cascading links using the h. 239 channel between different mcus nthe availability of a subscription license n warranty is at least 12 months. n guaranteed replacement of hard drives without removal from the territory of the academy of the armed forces of the republic of uzbekistan. n 57 virtualization server form factor: n? the server is made in the rack form factor ( design ) for installation in the 19 server cabinet of the eia 310d standard; n? height not more than 2u; nprocessor: n? two server microprocessors with x86 architecture, oriented to multithreaded computing, with at least 18 cores and operating at a frequency is at least 2.60 ghz must be installed. n? you must be able to work with 64 bit applications at the hardware level; nmemory and data storage: n? at least 128gb of ddr4 2933 ecc ram must be installed, and the modules must support detecting and correcting more than one error; n? the number of memory slots must be at least 24; n? the number of slots for installing 2.5 form factor disks is at least 2; n? support for installing sas, sata, ssd, nvme ssd drives; n? at least 2 solid state drives is at least 64 gb must be installed; n? ability to install and download from micro sd cards; nnetwork interfaces, i / o ports: n? there must be at least 4 ethernet rj45 ports with a bandwidth is at least 1gbit / s each; n? two port network adapter with a bandwidth is at least 10gbit / s must be installed with support for i / o virtualization functionality – the ability to divide each port into 4 network interfaces, must support the functionality of individual bandwidth control on each of the network interfaces; n? support for vlan tagging, nic teaming, vx lan, sr iov, vm ware net queue, and / or microsoft vmq n? at least three usb interfaces located on the outside of the case; n? at least one usb 3.0 interface located inside the enclosure; n? dedicated port is required to manage the server with a license for full kvm functionality; n? at least 3 pcie 3.0 slots for installing adapters; n? at least one micro sd high capacity card slot; n? at least 2 sfp+ sfp+ 10gbps direct connection cables are included; n? at least 2 two port fibre channel adapters must be installed with a bandwidth is at least 16 gbit / s per port; n? fc the fc adapter must support loading the operating system from the storage system, not loading the server cpu ( full hardware offload ) , npiv; npower supply, cooling: n? ? at least 2 hot swappable power supplies is at least 800w must be installed; n? the server must support the ability to hot swap the cooling modules; noperating system: nwarranty n? warranty is at least 3 years without returning the drives when the warranty is replaced n 58 virtualization software the virtualization software must meet the following requirements: ninstalling a hypervisor on bare metal ) ; nsupport for 32 and 64 bit guest operating systems ( os ) ; nsupport for up to 128 virtual processors; nhot add processors, ram, and other devices to a running guest os; nsupport for advanced physical host ram optimization mechanisms ( page deduplication, dynamic distribution, swap upload, compression, etc. ) ; nhot add and increase the size of virtual disks for a running guest os; nintegration with storage systems to improve the performance of operations of input output; ncreating virtual machines with up to 1tb of ram; nsupport for usb 3.0 devices in virtual machines; ncreating virtual machines with dynamically expanding disks ( allocating space as it fills up ) ; nbuilding clusters for fault tolerance with minimal vm interruption ( high availability ) ; nmigrating vms between hosts without downtime; nproviding support for virtual switches with port groups, traffic shaping, and vlan technologies; ncentralized management of licenses, host and vm updates; ndifferent levels of user access, with the ability to delegate access rights and permissions to each subsystem separately; nsupport for custom vm templates ( vm template ) navailability of a web client for centralized management of the virtual infrastructure; nintegration with backup systems; nsoftware licenses for 3 servers; nsoftware support must be at least 3 years from the vendor. n 59 storage system form factor: n? installation in the 19 server cabinet of the eia 310d type a standard; ndisk space in the storage system: n? at least 12 disks 1.8 tb 12g sas 10k hdd; n? expandable disk space at least 7 additional expansion modules; nconfiguration: n? the data storage system must be supplied with at least two ( 2 ) controllers in a single system; n? access to volumes and / or to each volume at the same time must be provided in the active active mode from all controllers at the same time; n? the system must support expansion with enterprise sas, nearline sas, and ssd disks; n? the total amount of cache memory in controllers must be at least 16gb, at least 8gb per controller; n? the ability to use ssd disks in storage simultaneously as caching read requests, creating volumes, and multi level data storage between different types of disks; n? at least 2 hot swap power supplies in the controller shelf and expansion shelves; n? interface for connecting additional sas extension shelves is at least 12gb / s; nnumber of ports: n? at least 4 x 16gbit / s fibre channel ports on each controller with sfp modules and optical cables installed; n? to ensure high availability and performance, each disk shelf must be accessible from each controller. nsystem and data management: n? the system must support different raid levels, namely raid 1, 5, 6, 10. n? the storage system must ensure that the logical disk data being written is distributed to all disks in the storage pool; n? the system must provide multi level storage and data transfer between different types of disks for optimal use of the system resource ( tiering ) . n availability: n? microcode and software upgrades must occur without stopping the system and service, including updates to nearline sas disk micro codes. n? the system must maintain continuous operation in the event of failure of: disk, power supply, controller, port, memory, fans. n? the cache memory must support data flushing to disk in case of power loss, in addition to protecting the cache memory with a battery. ncompatibility and integration: n? the system must support the following operating systems: microsoft windows server 2012 / 2016, redhat el, suse el, vm ware es xi; n? the system must be compatible with the built in ms windows, linux, unix, vmware operating systems, and data channel redundancy ( multipathing ) services to ensure fault tolerance and performance of data access; ntechnology for efficient resource allocation ( thin provisioning ) : n? support for efficient resource allocation for all applications and all volumes should be provided. n? system must support the allocation and deletion of blocks of zeros for space reclamation when data is deleted to increase the efficiency of disk space usage. ntechnology for creating instant snapshots of dedicated resources – ( snapshots ) : n? the system must support snapshot technology ( virtual snapshots of the volume state ) and volume cloning for the entire space; n? the system must support data migration without interrupting the service to another system ( of the same type ) if necessary; n? support for at least 512 snapshots; nwarranty n? warranty is at least 3 years, without returning the discs to the manufacturer. n 60 backup system form factor: n? installation in the 19 server cabinet of the eia 310d type a standard; nbackup coping: n? backup speed is at least 7tb / hour; n? backup speed when using data transfer optimization technologies at least 15tb / hour; n? support for replication to a remote backup system; n? support for data transfer optimization technologies; n? block level deduplication support; ncapacity: n? the volume of the backup system is at least 36tb of usable space; n? maximum possible capacity: at least 100tb of usable space; nport / network interface configuration: n? at least 4 1gbit / s rj 45 ports; n? dedicated system management port; nintegration: n? integration with symantec net backup, commvault simpana, veeam, hp data protector, and other backup systems; nwarranty n? warranty is at least 3 years, without returning the discs to the manufacturer. n 61 backup system software the backup system software must meet the following requirements nrestoring virtual machines: n? restore the entire vm on the source server or any other server; n? quick rollback functionality for restoring only changed data blocks; n? support for instant vm recovery from a backup file on the backup storage system; n? restore individual virtual machine files and virtual disks; nfiles restoration: n? ? restore files of file systems used in windows, linux; n? restore individual vms, guest os files, and application objects from emc vnx, vnx2, and vnxe hardware snapshots, hewlett packard enterprise ( hpe ) 3par store serv, store virtual, and store virtual vsa, as well as net app data ontap ( fas, flex array v series, data ontap edge ) , and others.; n? simultaneous recovery of multiple active directory objects, such as user and computer accounts ( directly in active directory or by exporting in ldif format ) , recovery of passwords, containers, and group policy objects; n? restore exchange objects and then save them, send them by email, or export them to the pst archive, or restore them to the original mailbox; n? support for running a vm from a backup in an isolated environment, for troubleshooting and testing without affecting the production environment. ability to create a vm copy from hardware snapshots. functionality for testing the possibility of recovery without pre recovery of the vm; nbackup coping: n? creating consistent vm backups at the image level based on application state; n? fast incremental backup of individual vms using an existing backup job; n? creating backups and replicas at the vm image level using emc vnx and vnxe hardware snapshots, hre 3par store serv, store virtual, net app data ontap ( including fas, flex array v series, data ontap edge ) , and others; n? built in features for deduplication, data compression, and exclusion of paging file blocks; n? archiving vm files and backups to stand alone tape devices or libraries ( including virtual ones ) connected to any microsoft windows server on the network; n? i / o monitoring functionality must be supported to ensure that backup and replication processes do not adversely affect running systems; n? integration with stores that support hardware deduplication, such as emc data domain boost, nre store once catalyst, exa grid accelerated data mover, and others; n? ability to track changed data blocks to reduce backup time; n? support for vm warev sphere and microsoft hyper v; nsupport and licenses: n? licenses for virtual environment backup software must cover the entire number of servers; n? software support must be at least 3 years old from the vendor n 62 licenses for the microsoft windows server operating system license right to operate 5 virtual machines on 3 servers of the virtualization system in fault tolerance mode. 63 firewall based on : 1 pcs in a server room, 1 pc in a laboratory of ict and cyber security requirements for technical and functional characteristics nconfiguration: n? at least 2 ethernet ports 10 / 100 / 1000 wan n? at least 14 ethernet 10 / 100 / 1000 lan ports n? at least 2 sfp ports, 1 gbit / s ethernet n? at least 1 usb 2.0 port n? at least 1 dedicated rj45 port for management nproductivity: n? bandwidth in the firewall mode is at least 7gbit / s n? bandwidth in ips mode is at least 500 mbit / s n? ngfw bandwidth is at least 360 mbit / s n? bandwidth in ssl inspection mode is at least 120mbit / sec n? bandwidth in ssl vpn mode is at least 250mbit / sec n? ipsec vpn bandwidth is at least 4 gbit / s n? availability of a real time anti virus scan module for passing traffic nfault tolerance n? ability to combine two devices into one virtual device; n? active / active and active / passive clustering work times are possible; ncompleteness: n? can be installed in a 19 server rack with a maximum of 1u; n? availability is at least 2 1gbit / c sfp lx transceivers; n? license for 80 clients, including antivirus, end user protection, telemetry, and endpoint verification for compliance with security requirements; nwarranty n? warranty for at least 3 years. nsubscription for security signature updates for at least 3 years. n 64 data network access switch based on: 3 pieces to the server room, 1 piece to the ict and cybersecurity laboratory nconfiguration: n? at least 48 10 / 100 / 1000 ethernet rj 45 poe ports+; n? at least 4 100 / 1000 ethernet sfp ports; n? at least 1 dedicated rj 45 port for the management network; n? at least 1 dedicated console port; n? at least 1 usb port n? at least one additional slot; nproductivity: n? switching matrices at least 176 gbit / s; n? stacking – at least 100gbit / c of the stacking module; n? bandwidth – at least 100 million packets per second. n? the size of the routing table is at least 2000 entries ( ipv4 ) , 1000 ( ipv6 ) n? mac address table size – at least 32000 entries ( ipv4 ) ipv6 support nrouting protocol: n? static, ospf v2, ospf v3, rip2, ripng . n? functional support: n? quality of service, class of service, traffic prioritization, rate limit; n? igmp snooping, stp, rstp, jumbo frame, n? bpdu port protection, dhcp protection, dynamic arp protection, port security, n? access control lists ( acls ) ; port based network access control ( ieee 802.1 x ) . n? number of vlans at least 2000; n? manageability: n? rmon, snmpv1, v2, v3, ntp, secure ftp, ssh, radius / tacacs+; n? out of band interface ( traffic isolation ) . ) n? openflow or sflow support; n? fault tolerance: n? ability to combine up to 8 devices in a fault tolerant stack, n? support for vrrp, multiple stp, lacp; n? equipment: n? height not more than 1u; n? availability of a set of mounts for installation in a standard 19 rack; n? switch stack module with a cable length is at least 1 meter; n? switching module with 4 ports of 10 gbit / c sfp+; n? at least 2 sfp + 10gbit / s modules for communication over a single mode optical cable at a distance is at least 3km. n? at least 2 sfp 1gbit / s modules for communication over a single mode optical cable at a distance is at least 3km n? at least 2 power supplies; n? warranty is at least 3 years. n 65 router for 10 ports ( router with optical spf module ) based on : n 1 piece to the ict and cybersecurity laboratory n purpose: to establish a connection between different network segments nrequirements for the router n ports configuration: n• at least 1 sfp 1gbit / s ethernet wan port n• at least 1 rj45 1gbit / s ethernet wan port n• at least 7 lan ports rj45 1gbit / s ethernet n• at least 2 free expansion slots n productivity: n• routing at least 900 thousand 64 byte packets per second n• ip sec vpn bandwidth at least 380mbps / s n size of the routing table – at least 200, 000 entries ( ipv4 ) n the number of vpn tunnels – not less than 800 n routing protocols: static ipv4, ipv6, rip, ospf, ospfv3, bgp 4, bgp+, is is n security: support for access control lists ( access control list – acl ) , tacacs+, radius, sshv2, nat, urpf, ip sec vpn ( des, 3des, aes 128 / 192 / 256 ) , storm protection in the network. n manageability: support for hierarchical structure of cli, snmpv1, v2, v3, rmon, ntp, ftp, tftp, sftp n fault tolerance: ability to combine multiple devices into a fault tolerant stack, support for vrrp, bfd, eaa n equipment: at least 1 sfp 1gbit / s ethernet module for communication over single mode optical fiber at distances up to 10 km, a set of mounts for installation in a standard 19 rack. n 66 core switch nbased on: 1 piece to the ict and cybersecurity laboratory n configuration: n? at least 2 slots for installing switching modules n? at least 2 qsfp 40gbps ethernet ports n? at least 1 dedicated rj45 port for management n? at least 1 dedicated rj45 console port n? at least 1 usb 2.0 port n? at least 2 power supplies n? at least 2 ventilation units. nproductivity: n? switching matrices at least 1000 million packets per second. n? capacity –not less than 1440???? / s n? the size of the routing table is at least 128, 000 entries ( ipv4 ) , 64, 000 entries ( ipv6 ) n? mac address table size at least 288, 000 entries ( ipv4 ) n? ipv6 support nrouting protocols: n? static ipv4 and ipv6, ospf v2, ospf v3, bfd, rip / ripv2 / ripng, bgp, bgp 4, bgp+, is is, mpls n? policy based routing, ipv6 tunneling, n switching protocols: n? stp ( ieee 802.1d ) , rapid stp ( rstp, ieee 802.1w ) , multiple stp ( mstp, ieee 802.1s ) , n? ieee 802.3ad link aggregation, igmp, igmp snooping, dhcp, dhcp snooping, arp, jumbo frame, port security n? dcb, dcbx, ets, ecn, fcoe, qos, pfc, packet filtering n? vxlan, mac based vlan, lldp med n? number of vlan is at least 4096 nmanageability: n? rmon, snmpv1 / v2c / v3, ntp, sntp, ftp, telnet, ssh. n? full console ( cli ) n? out of band interface n? ability to save multiple configurations on the flash. dual flash images n? radius and tacacs+ authentication. n? open flow or flow support nfault tolerance: n? ability to combine up to 9 devices in a fault tolerant stack, n? support vrrp, bfd, dldp, graceful restart for ospf, bgb, isis. n? updating the software without interrupting the service ncompleteness: n? height not more than 1u n? availability of a set of mounts for installation in a standard 19 rack, n? at least 2 switching modules with a total is at least 48 sfp+ 1 / 10gbit / s ethernet ports and at least 4 qsfp 40gbit / s ethernet ports n? availability is at least 2 qsfp+ ( dac ) cables for communication between core switches, n? availability of 2 power supply units and 2 hot swap ventilation units. nwarranty n? warranty for at least 3 years. n 67 server rack based on: 2 pieces per server room rack parameters: n? height not less than 42u, width not less than 600mm, depth not less than 1000mm; n? lockable front and rear doors with at least 80% perforation ( on the front door ) , evenly distributed over the entire height for optimal flow of cooling air; n? lockable side panels; ncompleteness: n? availability of a grounding kit; n? availability of a rack stabilization kit; n? availability is at least one set of mounting brackets for the rack; n? possibility of static installation and wheels for moving the rack in a room with a load of up to 1000 kg; n? at least 2 power distribution modules with 12x13. n 68 uninterruptible power supply based on: 6 pcs per server room form factor: n? installing the eia 310d standard in the 19 server cabinet; nparameters: n? type line interactive; n? nominal input voltage 230 v n? input voltage range: 165 290v; n? supported equipment power: at least 2.5 kw n? input connector iec c20 n? number of iec c19 outputs at least 1, number of c13 outputs at least 8; n? battery type valve controlled, leak proof, lead acid; n? hot swappable batteries; n? up to 4 additional battery modules can be connected; n? at least 8 minutes of operation at 50% load n? availability of the network management module ( rj45 ethernet interface ) using snmp, web, or vendor management software; nwarranty n? warranty is at least 12 months. n 69 touch vertical ninformation kiosk based on: 2 pcs per ict clc corridors n? main technical characteristics n? diagonal of 55” inches n? full hd resolution up to 1920 x 1080 pixel n? intel core i3 cpu n? hard disk at least 128 gb ssd n? ddr 3 ram at least 8 gb n? contrast 1100:1 n? brightness 400 cd / m 2 n? 16:9 aspect ratio n? number of touches 10 touch n? response time 8 ms n? gigabit ethernet lan interface n? windows 10 operating system n? metal body n? tempered glass n? warranty for at least 1 year after commissioning n 70 installation, delivery, commissioning, testing, cable lying and fitting labour required for network establishment and software installation and testing for all devices skilled job...
Due Date : January 25, 2021
Tender Value : ₹ Ref. Documents