supply of , thermit welding set complete (annexure a list attached), weld trimmer for 60 kg rail with power pack engine trolly and cutter as per rdso specification no. tm/sm/9 dt. 16.08.1991 rated power of engine 2.28 kw / 3.1 bhp fuel kerosine / petrol (start) capacity of power pack 500 bar dimension of trimming fixture 1050 x 450 x 400mm weight of weld trimmer (approx.) 62 kg. weight of power pack with hyd.oil (approx.) 48 kg. cutter weight 6kg. (approx.), rail profile grinder with fixtures for 60 kg rail thermit welding grinder as per rdso specification no. tm/sm/10 dt. 16.08.1991 (portable generator 2.28 kva (3.1bhp) fuel kerosine / petrol (start) capacity of power pack 500 bar rpm of grinder (normal) 5600 dimension 775 x 620 x 550 mm weight of grinding m/c with fixture 38 kg. time required for complete grinding 15 minutes, air compressor for thermit welding rated power of engine 2.28 kw / 3.1 bhp fuel kerosene / petrol (start) maximum air pressure 0.5 bar maximum air discharge 70 m3/hr overall dimensions l=1250mm, w=550mm, h=830m operating pressure for pre heating 0.20 to 0.25 bar, abrasive rail cutter as per rdso tm/sm/1 rev.01 of 2012 overall dimensions l 740mm x w 570mm x h 660mm time taken for cutting 4 min.(approx.)for 60kg. rail section 3 min.(approx.)for 52kg. rail section cutting tolerance within 0.5 mm rated power of engine 3.7 kw / 5 bhp fuel petrol weight of machine 32 kg., abrasive rail cutting disc 16 400mm grind well norton make 400 x 4x 22.23 for partner abrasive rail cutting machine. as per rdso specification no. tm/sm/1 rev. 01 of 2012, bolt tightening machine heavy duty (specifications: 1. drive: petrol engine 2. type: honda 3. out put: minimum 4.3 kw 4. tightening torque: range 50 nm to 450 nm 5. loosening torque: maximum 850 nm 6. weight of device: less than 100 kg 7. lightening arrangement: coach mounted 8. spare part availability : by oem 9. guarantee: 12 months with 39/41 mm socket. socket should be compatible for all type of power wrench ( bolt tightening machine), socket hex 41w, ejector, supply of 30.82/rk 21x28/871.030.3070, generator set(petrol) portable 5 kva make : honda or equivalent, halogen lamps with stand 500 watts with lead 10m long, stand tripad type for mounting halogen fittings. make: phillips or equivalent., portable rail drilling machine having automatic forward motion arrangement for drill fitted with diesel driven engine of 5hp with 30mm dia drill isi mark with mono rail wheel arrangement. as per rdso specification no. tm/sm/3 (rev. 01 of 2017), portable toe load measuring device suitable for vossloh tension clamp and erc(mechanical) tm/sm/14(rev. 01 of 2005 as per rdso), rail profile measuring device/template capable of measuring of vertical and lateral wear of 60 kg hh rail, made of hardened steel., hammer drilling machine gbm 2 24 dse, brand: bosch or equivalent. weight 2.9 kg rated input power 790 w tool dimensions height 210 mm rated speed 0 930 rpm, crow bar steel one side pointed and one side frog end confirming to is 704 of 1984., dip lorry (15 ton capacity) for sg, 1435mm gauge, with breaking arrangement. (set of 2 pieces) as per rdso specification ma 3041, dip lorry (15 ton capacity) for bg, 1676 mm gauge, with breaking arrangement. (set of 2 pieces) as per rdso specification ma 3041, powered multi purpose trolly with greaves diesel engine developing 10 hp at 3000 rpm having mechanism and 4 speed gear box of load carrying of 3 ton with material lorry attachable to it (for standard gauge), powered multi purpose trolly with greaves diesel engine developing 10 hp at 3000 rpm having mechanism and 4 speed gear box of load carrying of 3 ton with material lorry attachable to it (for broad gauge), light weight push trolley for sg 1435mm gauge rdso approved. as per rdso specification no. tm/sm/lwpt dt. 03.02.2014, light weight push trolley for bg 1676 mm gauge rdso approved. as per rdso specification no. tm/sm/lwpt dt. 03.02.2014, rail dolly for sg/bg suitable for transporting both rail and concrete sleepers etc. (with both arrangements), light weight mono rail cum road trolley/wheel barrow as per rdso specification no. tm/sm/16 dt. 31.03.1992, rail roller heavy duty for leading of rail/rail panel.(steel) approximate weight 23.0 kg., pie or equivalent brand export quality insulated level cum gauge model st #2 made from high tensile extruded steel tubing with built in sprit level. the gauge automatically sets at 90 to the rail. it determines gauge variation measures cross levels and provides super elevation. the gauge is useful for inspection without box calibrated for standard gauge (1435mm). only height guage is required, pie or equivalent brand export quality insulated level cum gauge model st #2 made from high tensile extruded steel tubing with built in sprit level. the gauge automatically sets at 90 to the rail. it determines gauge variation measures cross levels and provides super elevation. the gauge is useful for inspection without box calibrated for standard gauge (1435mm). only height guage is required, tommy bar conforming to is 704., double hexa deep socket black 3/4 sq. drive 41 mm size (supplier bombay hardware or equivalent), hammer keying 5 lbs conforming to is 15841, ball pein and cross pein hammer confirming to is 841 1963 wt. 500gm., sledge hammer 5 kg weight with handle., torque wrench dial type measure torque 30 nm to 280 nm 3/4 sq. drive (make: tohnichi or equivalent), torque wrench with ratched mechanics 3/4 drive 340 nm make macmaster small handle., spanner box type 41mm of hexagonal bolt supplier bombay hardware or equivalent, screw driver set model no: 820, pwi tool kit box in vip briefcase with fibre glass tape and rdso approved tools (pie or equivalent), versine measuring kit make: pie or equivalent model vk 2 or equivalent consisting of a pair of rail mounting brackets, versine scale (stainless steel ) with long nylon cord on winmder in padded cordwa case. make : pie or equivalent, rail thermometer magnetic base pen type as per rdso specification no. tm 67 dt. 28.01.2002 ( rev. of 2010), joggled fish plate for 60kg rail as per rdso approved., 1 mtr. long fish plate (6 hole) for 60 kg rail as per rdso approved, m. screw clamp for fixing joggled fish plate for 60 kg rail similar to drg. no. rdso t/5552/1 modified for 60 kg rails., jim crow small for 60 kg rail (hydraulic rail bender) tm/sm/5 dt. 08.05.1991, wire claws 8 prong (m.s.), special emergency kit for attending rail fracture as per rdso approved, mechanical tool box (for track), pan iron mortar 406.4mm ( 16 dia) 127mm deep 0.7mm thickness with bended ends 6.4mm dia wire all round., handle wooden for pickaxe/beater, handle wooden for phawrah size(80cm x 4.5cm), rake ballast 4 prong as per specification no. is 3991 drg. no. (y 31) with handle., steel shovel confirming to is 0274 part 1& 2 of 1981. with handle, rail tong lifting 60kg confirming to is 6000 of 1971 drg. y 25., chisel flat steel 200mm length chrome vanadium sreel cutting edge with 20mm. make: taparia or equivalent., magnifying glass 3 (75mm)dia. with handle, straight edge steel, 1 meter long made from hardened steel provide with 8 micron supplied in wooden box as per rdso approved., retro reflective banner flag with clamps handle for keying hammer size(70 x 4.5cm), rollers for destressing (m.s.) as per rdso specification., steel tong big size (sleeper) as rdso specification., erc clip aplicator & extractor/panpullar for pandrol fastening, rail nose wearing gauge for measuring wear at point & crossing, hand drill machine small portable make bosch, mechanical jack 15 ton capacity., continuous rail thermometers per rdso specification no. tm/tl/119 (tm/tl/119 rev.01 of 2015), hammer sledge 10 kg weight, general spanner ring 6 35 mm, allen key set (1.5 to 10 mm), portable welding machine up to 200a, with 3.0 mtr cable, holder and accessories....
Due Date : September 03, 2020
Tender Value : ₹ Ref. Documents