Indian Institute Of Technology - Delhi
37514189 tender for minor civil maintenance works at various laboratories and faculty rooms in academic area at iit delhi 1 by mechanical transport including loading, unloading and stacking 1.1 disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of engineer in charge. 2 providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level : 2.1 1:2:4 (1 cement : 2 coarse sand (zone iii) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) 2.2 1:3:6 (1 cement : 3 coarse sand (zone iii) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) 3 brick work with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor v level in all shapes and sizes in : 3.1 cement mortar 1:4 (1 cement : 4 coarse sand) 4 half brick masonry with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor v level. 4.1 cement mortar 1:4 (1 cement :4 coarse sand) 5 providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. 5.1 granite stone slab of colour black, cherry/ruby red 5.1.1 area of slab upto 0.50 sqm 5.1.2 area of slab over 0.50 sqm 6 providing edge moulding to 18 mm thick marble stone counters, vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by engineer in charge. 6.1 granite work 7 extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete. 8 extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. 9 providing and fixing ist quality ceramic glazed wall tiles conforming to is: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer in charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 10 providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with isi, is : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. 11 providing and fixing chromium plated brass handles with necessary screws etc. complete: 11.1 100 mm 12 providing and fixing aluminium tower bolts, isi marked, anodised (anodic coating not less than grade ac 10 as per is : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :12.1 250x10 mm 12.2 150x10 mm 13 providing and fixing aluminium handles, isi marked, anodised (anodic coating not less than grade ac 10 as per is : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 13.1 125 mm 13.2 100 mm 14 providing and fixing aluminium hanging floor door stopper, isi marked, anodised (anodic coating not less than grade ac 10 as per is : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. 14.1 twin rubber stopper 15 providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. 15.1 double strip (horizontal type) 16 providing and fixing bright /matt finished stainless steel handles of approved quality & make with necessary screws etc all complete. 16.1 providing wood work in frames of cupboard shutter and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately) using klin seasoned first class marandi wood. 17 providing and fixing 18mm thick both side laminated (clor to be approved by engineer in charge) hdhmr (high density high moisture resistance) board of make (action tesa / greenply / centuryply) in cup board shutters, inside shelves, sides, back portion or in drawer units etc. as per architectural drawings and site requirement and complete as per direction of engineer in charge. 18 providing and fixing 2mm thick 16 19 mm wide pvc edge banding tape of approved quality for cupboard / wardrobe shutters including neccesary hot glue by edge banding machine etc complete as per direction of engineer in charge. 19 providing and fixing auto closing spring loaded hinges (hydraulic type) of make hettich/hafele to cupboard shutters with full theaded steel screws including making necessary recess in board and finished etc. complete as per direction of engineer in charge. 20 structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 21 steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. 21.1 hot finished welded type tubes 22 providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as per is : 4457, complete as per the direction of engineer in charge. 22.1 in flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) 22.1.1 acid and alkali resistant tile 22.2 in dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) 22.2.1 acid and alkali resistant tile 23 providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to is: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. 23.1 size of tile 600x600 mm 24 deduct for not using 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) bedding in laying of floor tiles and jointing with grey cement slurry @ 3.3 kg/ sqm. 25 fixing glazed/ ceramic/ vitrified floor tiles with cement based high polymer modified quick set tile adhesive (water based) conforming to is: 15477, in average 3mm thickness. 26 providing and laying vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to i.s. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. 26.1 size of tile 600x600 mm 27 providing and fixing pvc flooring/vinyl flooring in roll form of thickness 2mm fixing with proper adhesive and hard rolled to ensure perfect bonding and avoid air gaps, colour and shade as per directions of engineer in charge. 28 providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by engineer in charge) of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per is: 277, in 240 mpa steel grade, 5 7 microns epoxy primer on both side of the sheet and polyester top coat 15 18 microns. sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by engineer in charge. the sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with epdm seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 29 providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main t runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross t of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main t at 600 mm center to center to form a grid of 1200x600 mm and secondary cross t of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. main t runners to be suspended from ceiling using gi slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm gi adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main t, bottom exposed width of 24 mm of all t sections shall be pre painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by engineer in charge. 29.1 gi metal ceiling lay in perforated tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of gi sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having nrc (noise reduction coefficient ) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black glass fiber acoustical fleece. 30 wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade : 30.1 two or more coats on new work 31 painting with synthetic enamel paint of approved brand and manufacture to give an even shade : 31.1 two or more coats on new work 32 providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 33 removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. 34 hacking of cc flooring including cleaning for surface etc. complete as per direction of the engineer in charge. 35 dismantling 15 to 40 mm dia g.i. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of engineer in charge.(a) internal work exposed on wall 36 demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer in charge. 36.1 nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) 37 demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer in charge. 37.1 in cement mortar 38 dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : 38.1 of area 3 sq. metres and below 38.2 of area beyond 3 sq. metres 39 dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. 39.1 for thickness of tiles 10 mm to 25 mm 40 dismantling of flushing cistern of all types (c.i./pvc/vitrious china) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. 41 dismantling tile work in walls laid in cement mortar including stacking material within 50 metres lead. 41.1 for thickness of tiles 10 mm to 25 mm 42 excavating holes upto 0.10 cum, including getting out the excavatedsoil, then returning the soil as deported in layers not exceeding 20cm in depth, including consolidating and deposited layer by ramming watering etc., disposing of surplus excavated soil as directed with ina lead of 50 mm and lift upto 1.5 m. 42.1 all kind of soil 43 providing and laying factory made chamfered edge cement concretepaver blocks in footpath, parks, lawns, drive ways or light trafficparking etc, of required strength, thickness & size/ shape, made bytable vibratory method using pu mould, laid in required colour &pattern over 50mm thick compacted bed of sand, compacting andproper embedding/laying of inter locking paver blocks into the sandbedding layer through vibratory compaction by using plate vibrator,filling the joints with sand and cutting of paver blocks as per requiredsize and pattern, finishing and sweeping extra sand. complete all asper direction of engineer in charge. 43.1 80 mm thick c.c. paver block of m 30 grade with approvedcolor design and pattern. 44 providing and fixing white vitreous china laboratory sink with c.i.brackets, c.p. brass chain with rubber plug, 40 mm c.p brass wasteand 40mm c.p. brass trap with necessary c.p. brass unions complete,including painting of fittings and brackets, cutting and making goodthe wall wherever required :44.1 size 600x450x200 mm 45 providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate z sections and other sections of approved make conforming to is: 733 and is: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required epdm rubber/ neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, c.p. brass / stainless steel screws, all complete as per architectural drawings and the directions of engineer in charge. (glazing, paneling and dash fasteners to be paid for separately) : 45.1 for fixed portion 45.1.1 powder coated aluminium (minimum thickness of powder coating 50 micron) 45.2 for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of epdm rubber / neoprene gasket required (fittings shall be paid for separately) 45.2.1 powder coated aluminium (minimum thickness of powder coating 50 micron) 46 providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to is: 12823 grade l type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with c.p. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer in charge. 46.1 pre laminated particle board with decorative lamination on both sides 47 providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with epdm rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer in charge . (cost of aluminium snap beading shall be paid in basic item): 47.1 with float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) 48 providing and fixing brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. 49 providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to is: 1868 with minimum anodic coating of grade ac 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with c.p. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of engineer in charge. (only weight of grill to be measured for payment). 50 providing and fixing sliding roller wheel suitable for aluminium sliding door with guide and necessary accessories and screw etc., complete. work shall be executed as per directions of engineer in charge. 51 providing and fixing sun control film/frosted glass film of approved quality, shade and colour as approved by engineer in charge. work shall be executed as per directions of engineer in charge. 52 providing and fixing roller blinds,manually operated with headrail aluminium powder coated, the fabric should be screen openness of 5% and composition of 75% pvc, 25% polyester with fabric weight of 465 gsm (tolerance± 5%), control unit set, plastic chain, complete with all required accessories etc., colour and shade as per sample approved by engineer in charge. make: vista/ mac/ marvel...