Public Works Department - Delhi

39816522 erection of repair to govt. sarvodayala kanya vidyalaya, chhawla, new delhi. sh white wash of buildling 1821026 erection of repair id 20231573...

Municipal Corporation - Delhi

39786390 improvement of type c qtrs. no. 29 and 31 by providing white wash, tiles, sanitary fittings etc. in mvid hospital....

Municipal Corporation - Delhi

39786382 improvement of type c qtrs. no. 29 and 31 by providing white wash, tiles, sanitary fittings etc. in mvid hospital....

Public Works Department - Delhi

39778929 erection of repair to gg special repair sec school school block shakarpur delhi dg 2023 24 id 1002191 sh white wash and painting...

Public Works Department - Delhi

39749968 1. erection of repair to sarvodaya kanya vidyalaya, basaidarapur, new delhi. (sh white wash of whole school building including all rooms, mp hall and boundary wall). 1. erection of repair to sarvodaya kanya vidyalaya, basaidarapur, new delhi. (sh white wash of whole school building including all rooms, mp hall and boundary wall). 2. erection of repair to sarvodaya vidyalaya, jaidev park, new delhi. (sh required for white wash in the school...

Public Works Department - Delhi

39699942 erection of repair to g.g.s.s. tughlakabad extn. (school id 1925048) new delhi during 2023 24. (sh white wash of school building)...

Public Works Department - Delhi

39657953 (a) construction of new septic tank at skv alipur (sch. id 1310031), (eor id 20221059) (b) interior and exterior painting work of skv no. 01 narela, and (c ) requirement of white wash and paint in gbsss bakhtawarpur (balance work)....

Public Works Department - Delhi

39619223 erection of repair to govt. sarvodaya kanya vidyalaya court road karkari raod vishwas nagar school id 1001196 delhi dg. 2023 24. sh water proofing of roof and white wash of school building....

Central Reserve Police Force - Delhi

39609815 repair maintenance and exterior interior white wash of semi permanent structure size25.33x18 19.50x17.50 51.50x16.66 51.50x19.50 total 10 nos at pdg kalkaji new delhi => limited...

Public Works Department - Delhi

39606801 erection of repair for sarvodaya kanya vidyalaya no.2, khyala, new delhi. (sh requirement of white wash in 30 rooms, corridors, toilets, boundary wall and other miscellaneous repair in sarvodaya kanya vidyalaya no.2. khyala (1514013)....

Nehru Yuva Kendra Sangathan - Delhi

39509403 tender for white wash / repairing work scraping and removing old paint from walls and malba removing ect. repairing of wall plaster with water proofing chemical etc.. providing and applying white cement bases wall putty and preparing surface etc. providing and applying emulsion pain on walls with apprived brand complete job...

Public Works Department - Delhi

39377585 erection of repair to gbsss palla majra delhi. (sh white wash and minor repair in old building (building id 13101513) (sch. id 1309269) and (erection of repair id 20221287)...

Ministry Of Home Affairs - Delhi

39376680 bids are invited for supply of civil materials wall putty , ms iron star wooden screws , oil bound washable distemper , acrylic exterier paint , cpvc pipes 20 mm dia , cpvc union 20 mm nominal bore , cpvc reducer 20 x 25 mm , cpvc elbow 20 mm , cpvc socket 20 mm , vitreous china flat white wash basin 630 x 450 mm , wc indian type , wc western type , plan glass sheet of nominal thickness 4 mm , hydraulic door closer bottle type ms body , rectangular shape 600 x 450 mm mirror , flexible coil shaped pvc waste pipe for sink and wash basin 40 mm dia , flexible coil shaped pvc waste pipe for sink and wash basin 35 mm dia , cp brass bibcock 15 mm short body , cp brass bibcock 15 mm long body , cp brass angle valve 15 mm , cp brass pillar cock 15 mm , flushing cistern pvc 10 litre capacity , 18 mm thick ply board , 12 mm thick ply board , cp brass healthfaucet with lead , hand shower health faucet , plastic seat cover , gi tank nipple 20 mm , ms mosquito net for doors and windows , ms hinge 3 inch , cp towel rod , aluminium sliding door bolt 250 mm , aluminium tower bolt 150mm , curtain rods 20 mm 1 point 8mtr long with bracket , pvc water storage tank 1000 ltr , cp hand wall mounted shower 200x200mm , cp waste coupling washbasin 32 mm , cp sink coupling 40 mm , pvc lead conncetion 600mm , ss conncetion 600mm , paint brush all size , synthetic enamel paint all color 4 ltr pack , ceramic glazed wall tiles , vitrified floor tiles , dril machine with hammer action with bit from 4 to 12 mm , tile cutter , hand grinder , tile cutter blade , grinder blade , wooden cutter blade , hexa blade one sided , iron cutter blade , drill bit for wood all size 5 pc , drill bit for iron all size 5pc , white cement , door stoper , pop , fevicol sh 1kg pack , aluminium silver coated americam door handle 8 inch , m seal 100gm , gi gate valve 20 mm , gi gate valve 25 mm , gi gate valve 40 mm , gi gate valve 50 mm , nail mixed , float valve 3by4 inch , cpvc pipe 25mm , cpvc pipe 32mm , cpvc pipe 40mm , cpvc elbow 25mm , cpvc elbow 32mm , cpvc elbow 40mm , cpvc tee 20 mm , cpvc tee 25 mm , cpvc tee 32 mm , cpvc tee 40 mm , cpvc reducer 20x25mm , cpvc reducer 25x32mm , cpvc socket 25mm , cpvc socket 32mm , cpvc socket 40mm , stainless steel fta 20x20mm , stainless steel fta 20x25mm , stainless steel fta 25x25mm , stainless steel fta 25x32mm , cpvc mta 20x25mm , cpvc mta 25x25mm , cpvc mta 32x32mm , cpvc mta 15x20mm , cpvc gate valve 20mm , cpvc gate valve 25mm , cpvc gate valve 32mm , cpvc tank nipple 25mm , brass spindle 3 no , brass spindle 4 no , double siphon washer 1by2inch , single siphon washer 3by4inch , taflon tape roll 12 pc , cpvc solvent 200ml , glass door pull handle h type ss202 grade finish stainless steel , glass door lock stainless steel isi , stainless steel wall hanger , stainless steel star wall hanger , acrylic wall selves bathroom corner 10x10inch , rubber gasket for glass window seal edpm , wood termite solution , looking mirror 45x60cm , ss hexagon reducing nipple , ss hexagon reducing extension nipple , jaquar wall mixer with hand shower , jaquar stop cock cp , jaquar bib tap cp , ambuja cement , course sand , fine sand , aggregate 20mm , steel bars 10by12mm , pvc water tank cover , jaquar concealed cock heavy duty , glass shelve , basin mixer cp , glass shelve corner , jaquar towel rack 600mm acn 1181n , floor trap drain trap , jaquar allied bottle trap , jaquar cp basin mixer single lever opp 15011bpm , pvc pipe 160mm dia , gi plug , glass putty , pvc gitti , teak ply , indigo floor terra cotta paint , cp toilet paper holder jaquar , aluminium foil tape waterseal , tricycle ricksaw with iron body size 4feet widthx5feet lengthx1feet height total quantity : 5131...

Public Works Department - Delhi

39363847 tender for eor to govt. girls sr. sec. school at pandwala khurd, new delhi. sh white wash, repair and finishing works 18220058...

Public Works Department - Delhi

39353137 tender for eor to govt. sarvodaya co ed vidyalaya najafgarh, new delhi during 2023 24. ( sh: white wash and paintingwork of entire building consisting of 34 rooms, 01 mp hall, 07 toilets, boundary wall grill, doors of class rooms, toilet and gallery grills etc. ) ( school id 1822002 ) ...

Public Works Department - Delhi

39353133 tender for eor to govt. co ed. sr. sec. school at rawta, new delhi. sh plastering of boundary wall outside and white wash of school 1822024...

Public Works Department - Delhi

39353011 tender for eor for sarvodaya kanya vidyalaya no.2 (school id 1515024), madipur, new delhi. (sh regarding white wash and minor repairs of wall and ceiling)....

Public Works Department - Delhi

39352950 tender for eor to govt. sarvodaya kanya vidyalaya (school id 1617036), amalwas (jwalapuri), delhi. (sh repair of walls and roofs of class rooms in middle wing along with white wash)....

Municipal Corporation - Delhi

39254780 repair / renovation of community center by repairing of toilet windows and white wash in sec 23 dwarka in dwarka b in ward no. 120, ngz....

Municipal Corporation Of Delhi - Delhi

39118896 tender for je store, ballimaran , w 79 imp. and dev. of je store various works i.e. plaster work , white wash, gate repair, toilet repair and cc work in ward no. 79 / cspz ballimaran general civil work...

Municipal Corporation Of Delhi - Delhi

38978956 tender for repair and renovation of community centre raghbir nagar, block m, in by pdg. white wash, painting, brick work, marble washed, ms grills, interlocking, tile, glazed tiles etc. at raghubir nagar in ward no.94 / wz....

Delhi State Cancer Institute - Delhi

38954086 bids are invited for supply of plumbing items sensor operated urinal , scistern set white , wash basin white , indian water closet , wash basin white , ptmt long body bib , ptmt std body bib cock , ptmt waste coupling , ptmt sink grating jali , ptmt angle cock , ptmt cistern handle , ptmt over head shower , pillar tap brass , pillar tap brass , pvc connection , pvc connection size , ptmt grating 125mm , pvc waste pipe , solid plastic seat cover , ptmt ball cock , siphon set for wall , ptmt jet l spray , ptmt bottle trap , ptmt cistern capacity , ptmt liquid soap , teflon tape 10mtr , sink mixer , ptmt 2 ina 1 angle total quantity : 928...

Military Engineer Services - Delhi

38897448 periodical services to smq md accommodation / airmen billets / snco mess under age b / r i of ge ( af ) subroto park. 1 taking down cement plaster etc on brick wall or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc and disposed off unserviceable materials to out side of mod land complete all as specified and as directed. 2 m&l 12 mm thick cement mortar 1:6, on unven surface ofbrick work or concrete surfaces on wallsurface even and smooth without using any extra cement 3 m&l for rendering 10mm thick on fair faces of brick work or concrete surfaces incement mortar ( 1:3 ) as in ceiling, complete all as specified and as directed 4 m&l 15 mm thick cement mortar 1:4 on other than fair faces of brick work or concrete surfaces on wallsurface even and smooth without using any extra cement 5 m & l preparation of newly plastered or unplastered surface and applying two coats of distemper oil emulsion on walls complete all as specified. 6 m & lpreparation of newly plastered surface and applying three coats of white wash on ceilings. 7 m&l for preparing new surfaces ( plastered or unplastered ) of walls and applying two coats of cement base paint over a coat of alkali resistant primer on surfaces of walls complete all as specified and as directed by the engineer in charge. 8 m&l for preparation of old decorated surfaces of walls including washing, rubbing down and stopping of distempered and painted surfaces and applying one coat of oil bound distemper ( white / tinted ) on walls complete all as specified and as directed by the engineer in charge. 9 m&l for complete removal of existing treatment of old decorated surfaces of walls by steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and washing, rubbing down andstoping of existing surface and making the surface even and smooth and apply two coats of distemper oil emulsion on walls complete all as specified. 10 m&l for preparation of old decorative surfaces including scraping down smoke dust mould, mean cut salt and trading oils and greasy spot etc. on ceiling including cornices, plasters etc. ( plastered or unplastered surfaces ) and applying one coat of white ( lime ) wash on old washed surfaces all as specified complete. 11 m&l for preparation of old decorative surfaces including scraping down smoke dust mould, mean cut salt and trading oils and greasy spot etc. on wall including cornices, plasters etc. ( plastered or unplastered surfaces ) and applying one coat of white ( lime ) wash on old washed surfaces all as specified complete. 12 m&l for prepration ofold plastered or unplastered surfaces of walls and applying one coat of cement base paint , complete all as specified and directed by engr in charge. 13 m&l for preparation of old surfaces of walls including corrices ( plastered or unplastered surfaces ) by scraping down smoke soot, moulds, moss and effloresnt salt and trading oil or greasy spots etc, including cornices and applying one coats of exterior weather proof paint on old decorated any surfaces walls / foot paths , etc., all as specified and as directed by engineer in charge. 14 m&l for complete removal of existing treatment from external surfaces of walls by brushes and washing down and stopping of surface and levelling / edging the disturbed portion plane / edges using necessary filling compound of putty to obtain smooth / regular / even finish surface with using of sand paper etc and prepare surface, applying two coats ofexterior weather proof ( coat ) paint on plastered / concrete surfaces of walls, paths , etc., over a coat of cement base paint primer complete all as specified and as directed by the engineer in charge. 15 m&l for preparation of old painted wooden surface of any description, not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint. complete all as specified and as directed by the engineer in charge. 16 m&l for one coat of synthetic enamel paint including preparation of old decorated steel surfaces / concrete surfaceof any description over 10 cm width or girth not otherwise described. 17 demolition of any type of roof treament ( i.e app membrance, brick tiles, mud phuska, cement concrete / lime concrete etc ) from roof any thickness including leaping plaster including removing the demolished material from roofout side defence land complete all as specified and directed by engineer in charge. 18 m & l for cement concrete 1 : 2 : 4 type b 0 ( using 12.5 mm graded stone aggregate ) laid as in paddingover roof slabs with wpc as per manufacturer instruction for providing proper slope including finishing surface by using extra cemnt even and fair all as specified. 19 m&l for three layer prefabricated atactic polypropylene polymer ( app ) modified 3 mm thick membrane ( weight not less 3 kg / sqm ) reinforced with 160 gms polester non woven fabric with scratched tool before finishing roof surface. when the concrete surface is still green, the roof surface shall be throughly wire brushed washed dried up and cleaned of all foreign matter and dust prior to the application of primer on the dried surface one coat of approved bituminous primer, having density in the range of 0.87 to 0.89 / kg at 25 dgree and viscositing of 70 to 160 cps manufactured by the same manufacturer @ 0.40 litres / sqm shall be applied. app membrane shall be laid on primed surfacetourch application mehtod after allowing 24 hours of primer to dry. laying of app membrane shall be commneced at the lowest level and worked upto the crest. app membrane will normally be laid in length at right angle to the direction of slope. the overlaps shall be of minimum 100 mm on longitudinal direction and 150mm on the transverse direction. all overlaps shall be bonded with bitumen primer and levelled by the heating the overlaps with brutane tourch. this treatment shall be done by theapproved authorised applicator. guarantee of treatment shall be for 10 years. thereafter app membrane shall be painting with two coat of water proofing paint with aluminium finish. ( ii ) independent testing of membrane for the approval technical parameters specified hereinafter shall be carried out the approved laboratories like national test house any other govt approved laboratory having facilities for the testing of membrane. 20 supply only liquid water proofing compound complete all as specified and as directed by engineer in charge. 21 disconnecting existing tanks exc 250 and n.exc 500 ltrs and above, setting aside ( or lowering if required ) for repairs, cleaning, etc. and hoisting if required reconnecting and re fixing in position. ( cleaning repairing, etc. measured separately 22 dismantling existing tanks capacity exc. 250 ltr but n.exc 500 ltr, and removing. 23 s&f tripple layer rotational moulded vertical water storage tanks with closed tops ( cylinderical ) fixhoisted and in position 500 ltr capacity incl disconnecting and refixing the existing gi fitting and pipe complete 24 s&f ball valves high pressure of ptmt with epoxy coated aluminium rod & high density plastic ball screwed suitable for iron pipe 20mm bore having weight not less than 210 gms complete all as specified and directed by engineer in charge. 25 s&f in repairs hdpe pvc lid ( cover ) for 500 / 1000 litres capacitypvc tank complete all as specified and directed by engineer in charge. 26 m&l for removing plants / sherbs grown on wall / junctions with roots duly rendering berbicide chemical and making good of the existing brick / concrete surfaces of area n.exc 0.50 sqm complete all as specified and as directed by the engineer in charge. 27 demolition of cement concrete ( un reinforced ) paving n. exc. 15 cm thickness ( below or above ground floor ) . 28 m&l for pcc ( 1:5:10 ) type e 2 using 40 mm graded brick aggregate as in sunken portioncomplete all as specified and as directed 29 m & l for cleaning the sunken floor surfaces by wire brushes, brooming, removing dust by dismantling of floor, lime terracing and applying following : ( a ) 10 mm thickscreed bedin cement mortar 1:3 complete mixed with water proofing compoundas per manufacturers instructions complete all as specified and directed. ( b ) bitumen primer confirming to is 3384 1965 @ 0.50 kg per sqm. ( c ) applying a tack coat of hot blown bitumen 85 / 25 @ 1.2 kg / sqm confirming to is 702 1998 for water proofing membrane. ( d ) applying of polymeric water proofing membrane weight not less than 3 kg / sqm over entire are with overlaps and sealed all as specified directed. ( e ) again applying a tack coat of hot blown bitumen 85 / 25 @ 1.2 kg / sqm over water proofing membrane. ( e ) dusting dry sand @ 0.75 kg per sqm over water proofing membrane. 30 s&f in repair 32mm diagalvanised iron spoutlightgradeforsunken portion completeallspecified and as directed. 31 supply and fixing in repair windows / ventilators fabricated from 0.60mm thick rollformed section made of galvanisedsteel powder coated ( base steel as per is 513d quality ) galvanised as per is 277 with zinc of 120gm / sqm .windows / ventilators having frame suitable for dual shutter i.e. inner and outer shutter with grill, glazed and wire mess shutter and all fitting, fixtures accessories incl6mmx12mm flat ironwith 10mm square bar m.s. grills complete as specified and shown in drawing no ceaf / std 191 / 2014, sheet 1 / 2 & 2 / 2 dated 11.12.14 ( 4000 series ) . 32 s & f in repair aluminium door single leaf with anodized aluminium frame of section 62.5 x 37 x 2.5 mm thick, shutter with bottom & middle rail of section 112.50 x 37 x 2.5 mm thick and styles & top rail of section 83 x 37 x 2.5 mm thick with centrally locking arrangement with lock make of ‘godrej’ or ‘link’ 7 lever and self closing device with rebate includingjointingcleats, fixing of builders hardware fittings, necessary numbers of floor spring and glazing with 5.5 mm thick ordinary plain glass includingnecessary fittings, fixtures & aluminium snap beads including taking down any type of door complete all as specified and directed. 33 s & f aluminum window with aluminum anodized frame of aluminum section 62.5 x 37 x 2.5 mm thick with shutters having styles & rails of aluminum section 44.45 x 44.45 x 2.5 mm thick including jointing cleats, glazing clips, rubber packing, aluminum snap beading, screws anodized aluminum fittings such as hinges, tower bolts, handles etc including 5.5 mm thick ordinary plain glass complete. including providing and fixing aluminum chequered grill of anodized section of mesh 100x100mm of 08 mm dia of bar fixed to frame with 20x20 mm aluminum flat with stainless steel wire mesh fixed with screw including taking down old one complete all as specified and as directed. 34 dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing ) removing serviceable tiles to store and rubbish off the premises complete all as specifiedand directed 35 m&l non skid ceramic coloured printed tiles 7 to 8 mm thick ( square / rectangular ) area of each tiles exc 0.11 sqm but n. exc 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match over 15 mm thick screed bed or bedding layer in cm ( 1:4 ) .complete all as specified and as directed by the engineer in charge. 36 m&l non skid ceramic coloured printed tiles 7 to 8 mm thick ( square / rectangular ) area of each tiles exc 0.11 sqm but n. exc 0.18 sqm, in floors or dado etc set and jointed in neat cement slurry and pointed in coloured cement to match over 15 mm thick screed bed or bedding layer in cm ( 1:4 ) complete all as specified and directed. 37 m&l forvitrified tiles 10mm thick ( square / rectangular ) polished, area of each tiles not exceeding 0.38 sqm, in floorsetc, set and jointed in neat cement slurry and pointed in white or coloured cement to match etc over 15 mm th screed in cement mortar 1:4 complete all as specified and as directed by engineer in charge. 38 m&l glazedcoloured ceramic tiles in vertical surface450 x 300x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10 mm thick rendering in cement mortar 1:4 complete all as specifiedand directed. 39 taking down or up steel water tubing and connections of 15 mm bore removing the debris including mortar out side defence land complete all as specified and directed by engineer in charge. 40 all as per above item no 39 but 20 mm bore. 41 s & f steel water tubing, galvanised, medium grade, isi marked with all fittings andfixed on walls and ceilingsor laid in floors bore of pipe 15 mm complete all as specified and directed by engineer in charge. 42 all as per item no 41 above but 20 mm bore. 43 dismantling of stone slabs laid, bedded and pointed in any mortar complete all as specified and directed 44 m&l machine cut kota stone slab 18 to 20 mm thick laid over and inluding 15 mm thick screedbed in cm 1:6 laid and jointed with grey cement slurry including cutting and pre polished mirror polishing all as specified and directed by engr in charge. 45 all as per item no44 above but in skirting over 10mm thick rendering in cement mortar 1:4 pre polished complete. 46 m&l for 75mm thick cement concrete 1:4:8 type d2 ( using 40 mm graded stone aggregate ) as in sub base for floors finishes all as specified. 47 s&f precast machine pressed pcc interlocking paver block of 60 mm thickness, m 35 grade of any shape and size confirming to is 15658 2006 with grey cement and pigment as approved complete all as specified and directed. 48 m&l forsand filling under floors or in foundations including watering and consolidation in layers not exc 25cm thickness all as specified and directed. 49 m&l for coloured chequered cement concrete tiles 25cm x25cm or 30cmx30cmx22 / 25 mm thick, set, jointed & pointed in neat cement slurry over 20 mm screed bed in cm ( 1:6 ) , demoilition of pcc and removing of debris away from mod land, complete all as specified and as directed by the engineer in charge 50 s&f in reapir vitreous china squatting pan “orrisa” pattern of size 580mmx440mm “white” with integral foot rest ( excluding flushing cistern and flush pipe ) incl provision of cement concrete bedding, ci ‘p’ trap 100mm dia connection to trap and flushing pipe, anti syphonage complete all as specified and directed by engineer in charge. 51 s&f in repairs vitreous china wash down water closet pan ( pedestal pattern ) excluding flushing cistern and flush pipe and including p or s trap and seat cover complete all as specified and as directed by engineer in charge. 52 s&f10 litre pvc valve less symphonic action type low levelflushing cistern with inlet ball valve float and handle incl cibracketand 32mm bore pvc flush pipe and connection to pipe complete all as specified and as directed by engineer in charge. 53 s&fplastic water closet seat cover white closed pattern with flat bottom and cover incl mild steel chromium plated hinging device complete all as specified and as directed by engineer in charge. 54 s&f in repair ball valves high pressure of ptmt with epoxy coated aluminium rod & high density plastic ball screwed suitable for iron pipe 20mm bore having weight not less than 210 gms complete all as specified and directed by engineer in charge. 55 s& finrepair110 mmborepvc ( swr ) pipesinglesocketedinany lengthwithrubber ringjoints, laidintrenchesorinfloorsetcincludingremovingfromsite completeallasspecifiedanddirectedbyengr in charge. 56 s&f in repair pvc ( swr ) bends any radius for 110 mm bore pvc pipe with cement joints complete all as specified and as directed. 57 s&f pvc ( swr ) junction single, ( single t ) equal or unequal ( supplied and fixed bore of pipe in 110mm ) 58 s& finrepair75 mmborepvc ( swr ) pipesinglesocketedinany lengthwithrubber ringjoints, laidintrenchesorinfloorsetcincludingremovingfromsite completeallasspecifiedanddirectedbyengr in charge. 59 s&f in repair pvc ( swr ) bends any radius for 75 mm bore pvc pipe with cement joints complete all as specified and as directed. 60 m & l cleaning and removing all scales and dirt, etc, from water tanks and from mouths of circulating pipes, etc ( capacity of tank exc 250 ltrs & n exc 500 ltrs ) and writing date of cleaning on water tank. 61 s&f in repair curtain rods with mild steel conduit pipe 20 mm bore pvc coated of 1 mm thick including temples, brackets etc complete all as specified and directed by engineer in charge 62 s&f in repair bib taps long body, cast copper alloy, fancy type with crutch or butterfly handles, chromium plated, screwed down to iron pipes or for brass ferrule of 15 mm borecomplete all as specified and directed by engineer in charge. 63 s & fin repair ptmtlong body bib tap 15mm dia pipe with crutch or butter fly handle screwed down, screwed for iron pipe and fixed....

Military Engineer Services - Delhi

38896005 tender for repair / replacement of flooring, walling and misc works in sncos mess, airmen billet under hq wac age b / r i of ge ( af ) subroto park. 1 taking downframe or chowkhats ( w / o taking off shutter from the frame ) of any description exc. 1.50 sqm and not exc. 4.00 sqm each incl necessary repair to opening with cm 1:4 complete all as specifiedand directed. 2 taking downframe or chowkhats ( w / o taking off shutter from the frame ) of any description notexc. 1.50 sqmeach complete all as specified and as directed by engineer in charge. 3 taking down door shutter of any descriptionexc. 1.0 sqm but n exc 2.0 sqm each complete all as specifiedand directed. 4 m&l for two coats synthetic enamel paint over a coat of red oxideprimer on new steel surfaces of any description not otherwise described over 10 cm width or girth including preparation of surfaces complete all as specified. 5 supply and fixing windows / ventilators fabricated from 0.60mm thick rollformed section made of galvanisedsteel powder coated ( base steel as per is 513d quality ) galvanised as per is 277 with zinc of 120gm / sqm .windows / ventilators having frame suitable fordual shutter i.e. inner and outer shutter with grill, glazed and wire mess shutter and all fitting, fixtures accessories incl6mmx12mm flat ironwith 10mm square bar m.s. grills complete as specified and shown in drawing no ceaf / std 191 / 2014, sheet 1 / 2 & 2 / 2 dated 11.12.14 ( 4000 series ) including taking down existing windows / ventilators of any description. 6 supply and fixing windows / ventilators fabricated from 0.60mm thick rollformed section made of galvanisedsteel powder coated ( base steel as per is 513d quality ) galvanised as per is 277 with zinc of 120gm / sqm .windows / ventilators having frame suitable forsingle shutter with grill, glazed shutter and all fitting, fixtures accessories incl 6mmx12mm flat ironwith 10mm square bar m.s. grills complete as specified and shown in drawing no ceaf / std 191 / 2014, sheet 1 / 2 & 2 / 2 dated 11.12.14 ( 3000 series ) including taking down existing windows / ventilators of any description. 7 hacking out old broken glass ( any thickness, size, quality or description ) from wooden / steel / aluminium framesglazed with putty or fixed with bead. ( old bead to be reused to fix glass ) complete all as specifiedand directed by engr in charge. 8 supply & fix sheet glass 4mm thick of selected quality n exc. 0.5 sqm each fixed to steel frame work with oil puttycomplete all as specifiedand directed by engr in charge. 9 s&f 4mm thick frosted floatglass and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specifiedand directed by engr in charge. 10 s&fstainless steel 304 grade wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed to window / door framecomplete all as specifiedand directed by engr in charge. 11 s&fin repair stainless steel 304 grade wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed to window / door framecomplete all as specifiedand directed by engr in charge. 12 s&f factory made solid pvc door frame of size 50mm x 47mm made out of 5mm plain colour pvc sheet reinforced with mild steel square tube completeall asspecified and directed. 13 s&f in frame at site factory made solid pvc moulded door shutter30mm thick with 2, 4 or 6 raised pannels design with 2mm thick moulded pvc sheet on front faceand 2mm plain colour pvc sheet on back face of particle board core as per specification & drawing. 14 s&f framed work as in doors chowkats or gates of angle iron or other section with gusset plates, rails braces etc complete drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel handing doors fittingscomplete all as specified and directed. 15 s&f 30 mm thick flush shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides complete all asspecified and directed. 16 s&f 2nd class hw glazed and skeleton 35mm thick shutters, open rebated and prepared to receive glass gauze etc ( with out sash bars ) edges of framing plain, chamferedor rounded, fitted with cut and mitred beads for securing glass. gauze etc complete all asspecified and directed. 17 taking down of old unserviceable cupboard incl all fixture and fittings. note : for measurement superficial area in elevation will be measured only. 18 s&f factory made18 mm thick pre laminated pvc celluca ply for cup board shutters including provision of shelves, partiations, fixed with steel screws and solvent cement adhesive including 1mm thick lipping all around the edges complete all as per manufactured instructions. the celluca ply shall be manufactured by an iso9000 certified company and celluca ply density shall not less than 600 kg / cum. 19 s&f continous piano hinges, mild steel, bright finish or electrogalvanised of width of flap 30mm 20 m &l for125 mm magnetic catches with brass body and striking plate including letting in and fixed. 21 s&f of 125 mm hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws 22 m&l for two coats of synthetic enamel paint over a coat of pink primer on new wood surfacecomplete all as specifiedand directed. 23 s&f 100 mm long butt hinges medium weight cold rolled mild steel alloy with galvanized complete all as specifiedand directed. 24 s&f 150 mm long aluminium door handle, cast type, anodized complete all as specifiedand directed. 25 s&f 100 mm long aluminium handles, cast type, anodised complete all as specifiedand directed. 26 s&fof 150 mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specifiedand directed. 27 s&f of 75 mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specifiedand directed. 28 s&f door stopper of aluminium, alloy body and tongue with hard drawn steel spring fixed in floors of 140 mm overall length of cover plate complete all as specifiedand directed. 29 s&f 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple ( bolt type ) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specifiedand directed. 30 dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing ) removing serviceable tiles to store and rubbish off the premises complete all as specifiedand directed 31 m&l for pcc 1:2:4 type b 1 ( 20mm graded aggregate ) , 25mm thick as in sub base to the tile flooring complete all as specified and directed. 32 m&l for non skid ceramic colouredtiles 7 to 8 mm thick ( square / rectangular ) area of each tiles exc 0.11 sqm but n. exc 0.18 sqm, in floors or dado etc set and jointed in neat cement slurry and pointed in coloured cement to match over 15 mm thick screed bed or bedding layer in cm ( 1:4 ) complete all as specified and directed. 33 m&l forvitrified double chargetiles 8 to 10 mm thick ( square / rectangular ) polished, area of each tiles not exceeding 0.36 sqm, in floorsetc, set and jointed in neat cement slurry and pointed in white or coloured cement to match etc over 15 mm th screed in cement mortar 1:4 complete all as specified and as directed by engineer in charge. 34 m&l for glazedcoloured ceramic tiles in vertical surface 300x 600x 7 mm / 300x 450x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10 mm thick rendering in cement mortar 1:4 complete all as specifiedand directed. 35 s&f in repairs sinks made of stainless steel 1.0 mmthickkitchenorlaboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed by engr in charge. 36 m&l for repair to broken sides / bottom of roof projection , facia by all means i.e. either by cement plaster of any thickness or by cement concrete 1:1.5:3 ( nominal mix ) type a 0, using 12.5 mm graded stone aggregate etc, using chicken wire mesh to reinforce & form work as required with two coats of appex paint over primer complete all as specified and as directed by the engineer in charge. 37 m&l for preparation of old decorated surfaces of walls including washing, rubbing down and stopping of distempered and painted surfaces and applying one coat of oil bound distemper ( white / tinted ) on walls complete all as specified and as directed by the engineer in charge. 38 m&l for preparation of old decorative surfaces including scraping down smoke dust mould, mass and efflorescent, salt and trading oils and greasy spot etc. on ceiling including cornices, plasters etc. ( plastered or unplastered surfaces ) and applying one coat of white ( lime ) wash on old washed surfaces all as specified complete. 39 taking down cement or cement lime plaster of any description on brick or stone walls etc including ranking out joints hacking for key scrubbing down with water etc complete all as specified and as directed by the engineer in charge 40 m&l for rendering 15mm thick on fair faces of brick work / stone work or concrete surfaces ( cement plaster 1:6 ) finished even and smooth without using extra cement complete all as specified and as directed by the engineer in charge 41 m&l for rendering 5mm thick cement mortar ( 1:3 ) as in ceiling, soffit of staircase, chhajjas facia etc including cement slurry etc complete all as specified and as directed by the engineer in charge. 42 m&l for oil bound distemper two coats over a coat of primer including preparation of newly plstered surfaces of walls or unplastered surfaces of walls complete all as specified and as directed by the engineer in charge. 43 m&l for three coats of white wash on ceilingsoffit of staircase, chhajjas facia etc newly plastered surfaces including preparation of newly plastered surfaces or unplastered surfaces complete all as specified and as directed by the engineer in charge. 44 m&l for preparation of old painted wooden surface of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint. complete all as specified and as directed by the engineer in charge. 45 m&l for one coat of synthetic enamel paint including preparation of old decorated steel surfacesof any description over 10 cm width or girth not otherwise described. complete all as specified and as directed by the engineer in charge. 46 taking down or up steel water tubing and connections including cleaning for re fixing / credit of 15 mm borecomplete all as specified and directed by engineer in charge. 47 all as per above item no 46 but 20 mm bore. 48 s & f steel water tubing, galvanised, medium grade, isi marked with all fittings andfixed on walls and ceilingsor laid in floors bore of pipe 15 mm complete all as specified and directed by engineer in charge. 49 all as per item no 48 above but 20 mm bore. 50 s&f in repair to rotational moulded vertical water storage tanks triple layer ( white colour ) with closed tops ( cylindrical ) hoisted and fixed in position 500 litre capacity including disconnecting and refixing the existing gi fitting and pipe complete all as specified and directed by engineer in charge. 51 s&f in repair to rotational moulded vertical water storage tankstriple layer ( white colour ) with closed tops ( cylindrical ) hoisted and fixed in position 1000 litre capacity including disconnecting and refixing the existing gi fitting and pipe complete all as specified and directed by engineer in charge. 52 s&f in repair ball valves high pressure of ptmt with epoxy coated aluminium rod & high density plastic ball screwed suitable for iron pipe 20mm bore having weight not less than 210 gms complete all as specified and directed by engineer in charge. 53 s&f in repairs hdpe pvc lid ( cover ) for 500 / 1000 litres capacitypvc tank complete all as specified and directed by engineer in charge. 54 s&f in repair gate valves gun metal with iron wheel head screwed both ends for iron pipe and fixed 20mm bore fixed complete all as specified and directed by engineer in charge. 55 s&f in repair bib taps long body , cast copper alloy, fancy type with crutch or butterfly handles, chromium plated, screwed down to iron pipes or for brass ferrule of 15 mm borecomplete all as specified and directed by engineer in charge. 56 s&f in repair stop valves, cast copper alloy, fancy type, chromium plated with long shank & cup ( concealedtype ) with crutch or butterfly handle, screwed both ends for iron pipe of 15 mm bore complete all as specified and directed by engineer in charge. 57 s&f in repair stop valves, cast copper alloy, fancy type, chromium plated with crutch or butterfly handle, screwed both ends for iron pipe of 15 mm bore complete all as specified and directed by engineer in charge. 58 s&f in repair two way stop valves, cast copper alloy, fancy type, chromium plated with crutch or butterfly handle, screwed both ends for iron pipe of 15 mm borecomplete all as specified and directed by engineer in charge. 59 s&fin repair 15 mm pillar taps swan neck cast copper alloy, with capstan heads, chromium plated screwed down high pressure, with or without lettered hot or cold with long screwed shanks and fly nutsscrewed for iron pipes and fixed , fancy typecomplete all as specified and directed by engineer in charge. 60 s&f in repair brass chromium plated waste coupling 32mm bore whb complete all as specified and as directed by engineer in charge. 61 s&f in repair 15mm dia pvc connection 450 mm long with brass nuts complete all as specified and as directed by engineer in charge. 62 s&f in repair 10 litre pvc valve less symphonic action type low levelflushing cistern with inlet ball valve float and handle incl cibracketand 32mm bore pvc flush pipe and connection to pipe complete all as specified and as directed by engineer in charge. 63 s&f in repair cp towel rail 450mm long 20mm dia fixed with and including chromium platedbrass screws and wooden / plastic cleatscomplete all as specified and as directed by engineer in charge. 64 s&f in repair glass shelf assembly consisting of 5.5 mm thick sheets glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed by engineer in charge. 65 s & fin repair corner glass shelf with bracketof make bea 46 of prayag or equivelent in marco / zim complete all as specified and directed. 66 s&f in repairs vitreous china wash down water closet pan ( pedestal pattern ) excluding flushing cistern and flush pipe and including p or s trapcomplete all as specified and as directed by engineer in charge. 67 s&f in reapir vitreous china squatting pan “orrisa” pattern of size 580mmx440mm “white” with integral foot rest ( excluding flushing cistern and flush pipe ) incl provision of cement concrete bedding, ci ‘p’ trap 100mm dia connection to trap and flushing pipe, anti syphonage complete all as specified and directed by engineer in charge. 68 s&f in repairscp bottle trap with internal partition 32mm size 300 mm x 190 mm with wall connection pipe and wall flange complete all as specified and as directed by engineer in charge. 69 s&f in repairs 32mm bore and 75cm long pvc flexible waste pipe for whb complete all as specified and as directed by engineer in charge. 70 s&fin repair 900mm x 600mm x 5mm thick fancy type designer fancy looking mirror of selected quality glass, mounted on 12mm thick board base and sealed the edges with pvc taping and fixed to pvc plug with chromium plated brass screws and cup washers complete all as specified and as directed by engineer in charge. 71 s&f in repairs vitreous china wash hand basin of size 550 mm x 400 mm white, flat back incl angle iron bracketsincl waste pipe of 32 mm dia of suitable length, pvc connection of 15 mm dia & 450 mm long with ptmt nuts with 32 mm dia brass chromium plated bottle trap and waste coupling complete all as specified and as directed by engineer in charge. 72 s&f in repairplastic water closet seat cover white closed pattern with flat bottom and cover incl mild steel chromium plated hinging device complete all as specified and as directed by engineer in charge. 73 s&f in repair hand shower ( health faucet ) with 1 meter long easy flex tube in chrome finish & wall hookcomplete all as specified and as directed by engineer in charge. 74 s&f in repairs mild steel chromium plated grating ( round ) 125 / 150mm dia fixed over floor / nahani trap ( with hole and without hole ) complete all as specified and as directed by engineer in charge. 75 s& finrepair110 mmborepvc ( swr ) pipesinglesocketedinany lengthwithrubber ringjoints, laidintrenchesorinfloorsetcincludingremovingfromsite completeallasspecifiedanddirectedbyengr in charge. 76 s&f in repair pvc ( swr ) bends any radius for 110 mm bore pvc pipe with cement joints complete all as specified and as directed. 77 s& finrepair75 mmborepvc ( swr ) pipesinglesocketedinany lengthwithrubber ringjoints, laidintrenchesorinfloorsetcincludingremovingfromsite completeallasspecifiedanddirectedbyengr in charge. 78 s&f in repair pvc ( swr ) bends any radius for 75 mm bore pvc pipe with cement joints complete all as specified and as directed. 79 supply and fixing in repair door seal, length varied from 750 mm to 900 mm complete all as specified&directedby engineer in charge . 80 s&fin repair of150 mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specifiedand directed. 81 s&f in repair 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple ( bolt type ) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specifiedand directed. 82 s&f in repair mild steel helical door spring 300 mm ordinary rat tail type incl roller and roller plate complete fixed with screws to wooden frame or with welding to steel frames complete all as specifiedand directed by engr in charge. 83 s&f drappery curtain rods decorative type stainless steel 304 grade, 25mm nominal diaand having wall thickness 1.40 mm of approved quality / make including fixing oftwo number decorative brackets fixed in brick / concrete wall, two number knob on both ends of curtain rods ( the length of each curtain rod will be 1.00m to 2.50m long ) complete all as directed and specified. 84 s&f in repair 100 mm long butt hinges medium weight cold rolled mild steel alloy with galvanized complete all as specifiedand directed. 85 s&f in repair aluminium frame powder coated any colour ( minimum thickness of powder coating 50 micron ) for doors, windows, partiations, ventilators with one or more rebates including joining cleat for fixing etc. ( without taking off shutters from the frames ) complete all as specified 86 m / lfor powder coatedaluminium door shutters, aluminium section weighing 1.3 kg / m approx including each shutter having 2 nos. ‘d’ type aluminium handles of 200 mm long, 2 nos. aluminium tower bolts of 200 mm long and 1 no. mortice lock of 6 lever with key in duplicate, regulated by double action hydraulic floor door spring, shutter partly glazed with 5.5 mm thick sheet glass and partly panelled with 12 mm thick pre laminated particle board fixed with glazing clips, rubber beadings and aluminium beading complete all as specifiedand directed. note: ( glass & prelaminated particle board paid separately ) 87 supply and fix sheet glass 5.5 mm thick of selected quality ( tinted glass ) exc. 0.5 sqm each fixed to aluminium frame work with necessary rubber beading complete all as specified and directed by engineer in charge, . 88 demolition of cement concrete in sunken portion in any position not otherwise specifically provided for complete all as specifiedand directed by engr in charge. 89 m & l for 25 mm thick pcc1:2:4 type b0 ( 12.5mm graded aggregate ) as in sub base for floor complete all as specifiedand directed by engr in charge. 90 m&l for providing and laying 20mm thick cement mortar plaster for the protection of the treatment in 1:3 mixed with dr fixit pidiproof lw+complete all as specified and directed by engineer in charge, . 91 m & l for providing and making fillet of 75mmx75mm in size with cement concrete in 1:2:4 in sunken portion, complete all as specified and directed by engr in charge. 92 m&l for providing and applying two component based treatment having dgt of 1mm in two coats making an excellent impermeable coating by the name dr fixit pidifin 2k. surface to be prepared by cleaning with wire brush, removing all loose aggregate complete all as specified and directed by engineer in charge. 93 m&l for refilling lime concrete with brick aggregate ( course ) in lime mortar1:3, 300mm thick in the sunken with the help of proper tools & equipments & plants complete all as specified and directed by engr in charge. 94 m&l for providing and making cement concrete in 40mm thickness in 1:2:4 type b0 ( 12.5mm graded aggregate ) mixing dr fixit pidiproof lw+. complete in sunken upto the below level of tiling complete all as specified and directed by engr in charge. 95 m&l for providing and applying two coats making an excellent impermeable coating by the name dr fixit pidicrete urp. surface to be prepared by cleaning with wire brush removing all loose aggregate complete all as specified and directed by engr in charge. 96 m & l for cleaning and removing all scales and dirt, etc, from water tanks and from mouths of circulating pipes, etc ( capacity of tank exc 250 ltrs & n exc 500 ltrs ) and writing date of cleaning on water tank. complete all as specified and directed by engr in charge. 97 s & fin repairptmtlong body bib tap 15mm dia pipe with crutch or butter fly handle screwed down, screwed for iron pipe and fixed complete all as specified and directed by engr in charge. 98 s&f in repair pvc ( swr ) gully trap 125 / 110 mm setting and jointing with solvent 99 s&f in repair pvc ( swr ) floor trap 75mm with grating includingjointing with solvent 100 supply and fixing in repairs aluminium die cast door closer hydraulically regulated, designation no. 2, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 36 to 60 kg complete all as specifiedand directed. 101 s&f light shade vitrified tiles9 to 10 mm thick ( square / rectangular ) polished, area of each tiles not exceeding 0.36 sqm, in floors etc set and jointed inneat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bedincm 1:6 complete all as specified and directed.. 102 all as per item no 101 above but in vertical surfaces such as dado / skirting over and includingrendering 15 mm thick in cement mortar 1:4 complete all as specified and directed. 103 dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed. 104 m&l machine cut pre polishedkota stone slab flooring 20 25 mm thick over cement screed base 15 mm thick in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. 105 all as per item no 104above but in vertical surfaces such as dado / skirting over and includingrendering 15 mm thick in cement mortar 1:4 complete all as specified and directed. 106 m&l 75mm thick pcc 1:3:6, type c 2 using 40mmgraded stone aggregate as in plinth protection finished even & fair including making groove not exc 3.00 meter interval and filling the same with mixture of sand and bitumencomplete all as specified and directed. 107 m&l cement concrete 40mm thick type b 1, 1:2:4 ( using 20mm graded stone aggregate ) in floors pavings etc finished even & smooth with out using extra cement. 108 s&f glass dividing strips 3mm thick and 38mm wide inserted in position. 109 demolition of brick work or stone masonry including pillars, cornices, arches etc built incement mortar or cement lime mortar complete all as specified and dircted, 110 m&l brickwork with fly ash bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4. complete all as specified and dircted, 111 m&l brick work with fly ash bricks, straight or curved on plan exc 6m mean radius in cm 1:4 complete all as specified and directed. 112 m&l cement plaster 15mm thick incm 1:4 on brick or concrete surfaces on external surfaces finished even and fair complete all as specified and directed.. 113 m&l applying three coats of white washon wallincluding preparation of newly plastered surfaces of wall complete all as specified and directed. 114 m&l applying two coats of super quality weatther proof exterior emulsion paint over & incl one coat of primer from the same manufacturer onexternal wall surfaces including preparation of new plastered surfaces on walls complete all as specified and directed, 115 m&l for non skid ceramic colouredtiles 7 to 8 mm thick ( square / rectangular ) area of each tiles exc 0.18 sqm but n. exc 0.38 sqm, in floors or dado etc set and jointed in neat cement slurry and pointed in coloured cement to match over 15 mm thick screed bed or bedding layer in cm ( 1:4 ) complete all as specified and directed. 116 all as per item no 115 above but in vertical surfaces such as dado / skirting over and includingrendering 15 mm thick in cement mortar 1:4 complete all as specified and directed....

Department Of Posts - Delhi

38878645 percentage rate e tender for the workof “urgent repair of ceiling and white wash of atr no mpt 389 at p&t colony sarojini nagar new delhi.”...

Indian Army - Delhi

38851891 bids are invited for white wash chunna , red ocher powder geru , terracotta paint , white paint , red paint , blue paint , black paint , paint brush , thinner 1 ltr , green paint total quantity : 441...

Public Works Department - Delhi

38846324 whitewash painting, primer, putty, patch works plastering, skirting etc. and other associated work needs to be done in old new building as the current white wash was done over 5 years back including the new building 1720028, rajokari, gbsss new delhi...

Department of Home Affairs - Delhi

38702178 bids are invited for wall putty , ms iron star wooden screws , oil bound washable distemper , acrylic exterier paint , cpvc pipes 20 mm dia , cpvc union 20 mm nominal bore , cpvc reducer 20 x 25 mm , cpvc elbow 20 mm , cpvc socket 20 mm , vitreous china flat white wash basin 630 x 450 mm , wc indian type , wc western type , plan glass sheet of nominal thickness 4 mm , hydraulic door closer bottle type ms body , rectangular shape 600 x 450 mm mirror , flexible coil shaped pvc waste pipe for sink and wash basin 40 mm dia , flexible coil shaped pvc waste pipe for sink and wash basin 35 mm dia , cp brass bibcock 15 mm short body , cp brass bibcock 15 mm long body , cp brass angle valve 15 mm , cp brass pillar cock 15 mm , flushing cistern pvc 10 litre capacity , 18 mm thick ply board , 12 mm thick ply board , cp brass healthfaucet with lead , hand shower health faucet , plastic seat cover , gi tank nipple 20 mm , ms mosquito net for doors and windows , ms hinge 3 inch , cp towel rod , aluminium sliding door bolt 250 mm , aluminium tower bolt 150mm , curtain rods 20 mm 1 point 8mtr long with bracket , pvc water storage tank 1000 ltr , cp hand wall mounted shower 200x200mm , cp waste coupling washbasin 32 mm , cp sink coupling 40 mm , pvc lead conncetion 600mm , ss conncetion 600mm , paint brush all size , synthetic enamel paint all color 4 ltr pack , ceramic glazed wall tiles , vitrified floor tiles , dril machine with hammer action with bit from 4 to 12 mm , tile cutter , hand grinder , tile cutter blade , grinder blade , wooden cutter blade , hexa blade one sided , iron cutter blade , drill bit for wood all size 5 pc , drill bit for iron all size 5pc , white cement , door stoper , pop , fevicol sh 1kg pack , aluminium silver coated americam door handle 8 inch , m seal 100gm , gi gate valve 20 mm , gi gate valve 25 mm , gi gate valve 40 mm , gi gate valve 50 mm , nail mixed cpvc elbow 40mm , cpvc tee 20 mm , cpvc tee 25 mm , cpvc tee 32 mm , cpvc tee 40 mm , cpvc reducer 20x25mm , cpvc reducer 25x32mm , cpvc socket 25mm , cpvc socket 32mm , cpvc socket 40mm , stainless steel fta 20x20mm , stainless steel fta 20x25mm , stainless steel fta 25x25mm , stainless steel fta 25x32mm , cpvc mta 20x25mm , cpvc mta 25x25mm , cpvc mta 32x32mm , cpvc mta 15x20mm , cpvc gate valve 20mm , cpvc gate valve 25mm , cpvc gate valve 32mm , cpvc tank nipple 25mm , brass spindle 3 no , brass spindle 4 no , double siphon washer 1by2inch , single siphon washer 3by4inch , taflon tape roll 12 pc , cpvc solvent 200ml , glass door pull handle h type ss202 grade finish stainless steel , glass door lock stainless steel isi , stainless steel wall hanger , stainless steel star wall hanger , acrylic wall selves bathroom corner 10x10inch , rubber gasket for glass window seal edpm , wood termite solution , looking mirror 45x60cm , ss hexagon reducing nipple , ss hexagon reducing extension nipple , jaquar wall mixer with hand shower , jaquar stop cock cp , jaquar bib tap cp , ambuja cement , course sand , fine sand , aggregate 20mm , steel bars 10by12mm , pvc water tank cover , jaquar concealed cock heavy duty , glass shelve , basin mixer cp , glass shelve corner , jaquar towel rack 600mm acn 1181n , floor trap drain trap , jaquar allied bottle trap , jaquar cp basin mixer single lever opp 15011bpm , pvc pipe 160mm dia , gi plug , glass putty , pvc gitti , teak ply , indigo floor terra cotta paint , cp toilet paper holder jaquar , aluminium foil tape waterseal , tricycle ricksaw with iron body size 4feet widthx5feet lengthx1feet height total quantity : 5131...

Municipal Corporation - Delhi

38645413 repair and maintenance of dispensary in bijwasan by providing brick work, white wash, steel, cc and sainitary repair etc in ward no. 131, bijwasan ngz....

Public Works Department - Delhi

38629646 eor to govt. boys senior secondary school, moti bagh i 1719010, new delhi. sh minor repair and white wash of whole building...

Public Works Department - Delhi

38590140 eor to gbsss ml narela del 40 sh white wash interior exterior paintingwork in narela gbsss mussadi lal gbss palla majra del sh white wash minor repair in gbsss bhorgarh del sh interior exterior painting work white washed minor repring...

Public Works Department - Delhi

38537450 tender for e.o.r. to government skv, laxmi nagar, delhi. ( sh: miscellaneous repair work of old building & white wash ) ( school id 1003028 ) ....

Municipal Corporation - Delhi

38533274 repair and maintenance of m and cw centre in bijwasan by providing tile, sanitary fittings, roof repair, white wash etc in ward no 131 bijwasan ngz....

Municipal Corporation - Delhi

38531466 repair and maintenance of chest clinic by providing brick work, plaster, white wash, sanitary repair etc in ward no. 131 bijwasan ngz....

Municipal Corporation Of Delhi - Delhi

38531181 repairing of polyclinic kanjhawla, plaster work , roof work, white wash in ward no. 32 ( kanjhawla ) in narela zone repairing of polyclinic kanjhawla, plaster work , roof work, white wash in ward no. 32 ( kanjhawla ) in narela zone....

Public Works Department - Delhi

38479383 whitewash / painting, primer, putty, patch works / plastering, skirting etc. and other associated work needs to be done in old / new building as the current white wash was done over 5 years back including the new building : 1720028, rajokari, gbsss, new delhi....

Municipal Corporation Of Delhi - Delhi

38458518 improvement of m and cw centre naiwalan repair of roof, white wash, repair of toilet, repair of main gate and back gates. repair of staff quarter no. 1, 2 and 3 ( lying vacant ) in ward no. 83 / kbz....

Public Works Department - Delhi

38455347 tender for white wash painting of doors, windows, grills in complete school premises 1719101, laxmi bai nagar co ed, sss....

Municipal Corporation Of Delhi - Delhi

38328050 improvement of dr. ambedkar aushadhalaya devnagar dispensary tile work, white wash, seepage, repair of windows and doors etc. in ward no. 84/kbz...